We never sell your data to third parties
Image for Illustration purposes only. Actual product may vary
$887.74 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable:No
Actuation Type
Lever Operated
Body Material
Steel
Flow Rate
5 cu-ft/min
Media
Oil
Number of Ports/Ways
4-Way
Port Size
3/8 in NPTF
Pressure Rating
10000 psi
Type
Open Center Manual
Single or double-acting cylinders 4-way/3-position (open-center) manual valves
Application – Single or double-acting cylinders. Actuation – Lever operated, detent positioned. Functions – The 9511 (open center) valve can be used if holding is not a requirement, as when running two separate hydraulic tools. Provides “advance” and “return” only. Used on these pumps – P460, PA17, PA46, PA55, PE17, PE21, PE30, PE46, PE55, PE84, PE90, PE120, PE200, PE400, PG30, PG55, PG120, PG400, PQ60 and PQ120 series. 10,000 PSI., 3/8" ports, 5 GPM max flow rate. Note: a Pressure Switch and/or Gauge (Analog or Digital) may be attached to valve 9511 if desired. Note: Also, valves may be remote mounted with a 9510 Sub plates. important: Conversion kit 251528 must be used when mounting any of the valves on PA17 or PE17 pumps.
Specifications
| Order No. | 9511 |
|---|---|
| Cylinder Application * | S. A. & D. A. |
| Operation | Manual |
| Valve Type | 4-way, 3 Pos. Open Center |
| Volt | — |
| Advance / Return | Yes |
| Advance / Hold Return | Yes |
| posi-check Feature | No |
| posi-check Feature | 4. 2 |
SKU: 1966869
Mro product supply
Thanks MROSUPPLY, fair prices and good stock, fast shipping and communication. Always the first stop for tooling and supplies.
Read more
| Brand | Saginaw Control |
| Model | SCE-8P6GALV |
| Brand | Timken Drives |
| Model | 39382 |
| Brand | Bestorq |
| Model | 3/5V800 |
| Brand | WEG |
| Model | CFW500-CRS232 |
SKU: 1966869
Mro product supply
Thanks MROSUPPLY, fair prices and good stock, fast shipping and communication. Always the first stop for tooling and supplies.
Read moreDisclaimer: The return policy information shown below is merely a copy of the text as stated in IDC-USA's Annual Return Policy.
File: http://documents.mrosupply.com/file_uploads/IDCreturnpolicy.pdf
ANNUAL RETURN POLICY PURPOSE: The purpose of IDC-USA’s Annual Return Policy is to allow IDC Distributors the opportunity to return salable stock merchandise of current design that may not have adequate “turns” and replace it with faster moving product.
ACCEPTANCE: IDC Owner-Distributors shall submit a return list to IDC-USA with all pertinent information as follows:
a. Product brand name
b. Quantity
c. IDC-USA’s product identification number
d. Corresponding distributor’s P.O. number or invoice number Acceptance of return shall be subject to IDC-USA inventory levels and manufacturer’s restrictions.
AUTHORIZATION: The return shall be audited and the IDC Owner-Distributor will receive an approved return list with a Return Material Authorization (RMA) number assigned to it. RETURN DATE: Each owner-distributor shall be assigned a month during which they shall be entitled to make a single annual return.
Product Qualification: All products returned must be:
a. On the current price list
b. In good resale condition
c. In the original packaging
d. Purchased from IDC-USA within 3 years of the return
e. Stock items only; no special order items
f. Only those items which have been approved
VALUE: The IDC Owner-Distributor shall receive a credit not to exceed 5% of the owner-distributor’s prior year annual purchases from the IDC Distribution Center. Credit received shall be the actual purchase price or price in effect at the time of the return, whichever is lowest, less applicable restocking charges. Additionally, all annual returns must have a minimum return value of $100.
RESTOCKING CHARGES: There will be a 15% restocking fee unless return is offset by a noncancelable order of equal value to be placed at the time of return. All items received that are not in their original box shall be subject to an additional 15% repackaging fee.
FREIGHT: Returns will be made freight prepaid by the IDC Owner-Distributor to the IDC Distribution Center. The packing slip and all cartons must reference the RMA number. The owner-distributor will be notified of any items received that do not qualify as set forth above. Those items will not be credited and shall be scrapped unless the IDC Owner-Distributor directs otherwise and assumes any additional transportation charges.