We never sell your data to third parties
Image for Illustration purposes only. Actual product may vary
$1,933.75 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable:No
Actuation Type
Pilot
Body Material
Aluminum
Flow Rate
5 cfm
Height
6.2 in
Length
8.3 in
Media
Oil
Number of Ports/Ways
3-Port/3-Way
Port Size
3/8 in NPTF
Pressure Rating
10000 psi
Type
3-Way Tandem Center Pump Mounted
Width (in)
2.5
Single-acting cylinders
Application – Single-acting cylinders. Actuation – solenoid operated: 9605 is 115 volt, 50/60 Hz; 9599 is 24 volt, 50/60 Hz. Functions – “Advance, ” “hold” and “return” positions. When in “advance, ” solenoid “B” is energized and oil goes from pump to cylinder through pressure port. In “return” position, solenoid “A” is energized and oil is directed from cylinder and pump to reservoir. With both solenoids de-energized, in “hold” position, oil from pump is directed back to reservoir while oil is checked in cylinder. The posi-check feature holds load when shifting from “advance” to “hold” position. Used on these pumps – Furnished with pilot lines and adapters for PE55, PE30 (carrying handles must be removed) and PE120 series. For application on other models, consult factory. 10, 000 PSI., 3/8” ports, 5 GPM max flow rate. Note: Valves are shipped without controls. Use Remote Hand Control (No. 202777). Consult factory for field installation. caution: To prevent sudden, uncontrolled descent of a load as it is being lowered, use a Load Lowering Valve (No. 9596) or Counter Balance Valve (No. 9720) in conjunction with the directional valve used in your application. important: When ordering any valve for a PE30 or PG30 series pump, ½” longer mounting screws are required. For valves 9500, 9501 and 9511, order four 12001 cap screws. For valves 9599 and 9605, order four 251078 cap screws. For valve 9609, order four 10855, cap screws.
Specifications
| Order No. | 9605 |
|---|---|
| Cylinder Application * | S. A. |
| Operation | Pilot Operated solenoid |
| Valve Type | 3-way, 3 Pos. Tandem Center |
| Volt | 115 |
| Advance / Return | No |
| Advance / Hold Return | Yes |
| posi-check Feature | Yes |
| posi-check Feature | 14. 0 |
SKU: 1966869
Mro product supply
Thanks MROSUPPLY, fair prices and good stock, fast shipping and communication. Always the first stop for tooling and supplies.
Read more
| Brand | Bunting Bearings |
| Model | ECOP243216 |
| Brand | Timken Belts |
| Model | M-2-7/16 |
| Brand | Hubbell Wiring |
| Model | PH2304PB045 |
| Brand | HKK Chain |
| Model | C2040R50 |
| Brand | Cutler Hammer |
| Model | 14150AL17 |
| Brand | TB Woods |
| Model | JVS1502138 |
| Brand | Hubbell Wiring |
| Model | HBL16R90 |
| Brand | Pramet |
| Model | DNMG 431-FM:T8330 |
SKU: 1966869
Mro product supply
Thanks MROSUPPLY, fair prices and good stock, fast shipping and communication. Always the first stop for tooling and supplies.
Read moreDisclaimer: The return policy information shown below is merely a copy of the text as stated in IDC-USA's Annual Return Policy.
File: http://documents.mrosupply.com/file_uploads/IDCreturnpolicy.pdf
ANNUAL RETURN POLICY PURPOSE: The purpose of IDC-USA’s Annual Return Policy is to allow IDC Distributors the opportunity to return salable stock merchandise of current design that may not have adequate “turns” and replace it with faster moving product.
ACCEPTANCE: IDC Owner-Distributors shall submit a return list to IDC-USA with all pertinent information as follows:
a. Product brand name
b. Quantity
c. IDC-USA’s product identification number
d. Corresponding distributor’s P.O. number or invoice number Acceptance of return shall be subject to IDC-USA inventory levels and manufacturer’s restrictions.
AUTHORIZATION: The return shall be audited and the IDC Owner-Distributor will receive an approved return list with a Return Material Authorization (RMA) number assigned to it. RETURN DATE: Each owner-distributor shall be assigned a month during which they shall be entitled to make a single annual return.
Product Qualification: All products returned must be:
a. On the current price list
b. In good resale condition
c. In the original packaging
d. Purchased from IDC-USA within 3 years of the return
e. Stock items only; no special order items
f. Only those items which have been approved
VALUE: The IDC Owner-Distributor shall receive a credit not to exceed 5% of the owner-distributor’s prior year annual purchases from the IDC Distribution Center. Credit received shall be the actual purchase price or price in effect at the time of the return, whichever is lowest, less applicable restocking charges. Additionally, all annual returns must have a minimum return value of $100.
RESTOCKING CHARGES: There will be a 15% restocking fee unless return is offset by a noncancelable order of equal value to be placed at the time of return. All items received that are not in their original box shall be subject to an additional 15% repackaging fee.
FREIGHT: Returns will be made freight prepaid by the IDC Owner-Distributor to the IDC Distribution Center. The packing slip and all cartons must reference the RMA number. The owner-distributor will be notified of any items received that do not qualify as set forth above. Those items will not be credited and shall be scrapped unless the IDC Owner-Distributor directs otherwise and assumes any additional transportation charges.