We never sell your data to third parties
Image for Illustration purposes only. Actual product may vary
$7,028.99 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable:No
Engine HP
6 hp
Engine Speed
3600
Flow Rate
55 cu-in/min
HP Maximum Pressure (psi)
10000 psi
Overall Height
22 in
Overall Length
18 in
Overall Width
12-1/2 in
Reservoir Capacity
1300 cu-in
Series
PG55
Valve Type
4-Way
30-55 cu. in. min. Gasoline power supply ideal for remote locations for use with cylinders upt to 150 Ton. gasoline power supply ideal for remote locations.
| PG30 series | for up to 75 TON cylinders. |
|---|---|
| PG55 series | for up to 150 TON cylinders. |
- All gasoline engine/hydraulic pumps feature posi-check valve to guard against pressure loss when valve is shifted from “advance” to “hold”.
PG303 and PG304
- Has an aluminum reservoir with 375 cu. in. of usable oil.
- Has same basic pump as PE30 series electric operated pumps.
- PG30 series pumps are equipped with roll cages to protect pump from damage.
- PG303 is for single-acting cylinders, has a 9520 valve with separate internal return line; allows oil from running pump to return to reservoir, independently of cylinder return oil, when valve is in “return” position.
- PG304 is for double-acting cylinders, has a 9506 4-way (tandem center) valve.
PG553 and PG554
- 6 hp Intek “Diamond Edge” 4-cycle, by Briggs & Stratton. 5 gallon reservoir.
- Same basic pump as PE55 series electrical Vanguard pumps.
- PG553 has a 9520 3-way valve for single acting cylinders.
- PG554 has a 9506 4-way valve for double acting cylinders.
Specifications
| Order No. | PG554 |
|---|---|
| For Use with Cyl. Type | Double-Acting |
| Description | PG553, except has double-acting valve |
| Valve Type | 4-Way |
| Valve No. | 9506 |
| Valve Function | Advance Hold Return |
| Reservoir Usable (cu. in.) | 1, 300 |
| Horsepower | 6 |
| Horsepower | 4 |
SKU: 1966869
Mro product supply
Thanks MROSUPPLY, fair prices and good stock, fast shipping and communication. Always the first stop for tooling and supplies.
Read more
| Brand | RAB Lighting |
| Model | A19-12-E26-850-ND |
| Brand | Hydraulic Technologies |
| Model | 9002A |
| Brand | RAB Lighting |
| Model | T8-8-36G-840-DIR |
| Brand | Hydraulic Technologies |
| Model | 9030A |
| Brand | Remke |
| Model | RSP-20516-3 |
| Brand | Timken |
| Model | 359S-90084 |
| Brand | Hydraulic Technologies |
| Model | 9210A |
| Brand | Timken |
| Model | DVP10K045SM |
SKU: 1966869
Mro product supply
Thanks MROSUPPLY, fair prices and good stock, fast shipping and communication. Always the first stop for tooling and supplies.
Read moreDisclaimer: The return policy information shown below is merely a copy of the text as stated in IDC-USA's Annual Return Policy.
File: http://documents.mrosupply.com/file_uploads/IDCreturnpolicy.pdf
ANNUAL RETURN POLICY PURPOSE: The purpose of IDC-USA’s Annual Return Policy is to allow IDC Distributors the opportunity to return salable stock merchandise of current design that may not have adequate “turns” and replace it with faster moving product.
ACCEPTANCE: IDC Owner-Distributors shall submit a return list to IDC-USA with all pertinent information as follows:
a. Product brand name
b. Quantity
c. IDC-USA’s product identification number
d. Corresponding distributor’s P.O. number or invoice number Acceptance of return shall be subject to IDC-USA inventory levels and manufacturer’s restrictions.
AUTHORIZATION: The return shall be audited and the IDC Owner-Distributor will receive an approved return list with a Return Material Authorization (RMA) number assigned to it. RETURN DATE: Each owner-distributor shall be assigned a month during which they shall be entitled to make a single annual return.
Product Qualification: All products returned must be:
a. On the current price list
b. In good resale condition
c. In the original packaging
d. Purchased from IDC-USA within 3 years of the return
e. Stock items only; no special order items
f. Only those items which have been approved
VALUE: The IDC Owner-Distributor shall receive a credit not to exceed 5% of the owner-distributor’s prior year annual purchases from the IDC Distribution Center. Credit received shall be the actual purchase price or price in effect at the time of the return, whichever is lowest, less applicable restocking charges. Additionally, all annual returns must have a minimum return value of $100.
RESTOCKING CHARGES: There will be a 15% restocking fee unless return is offset by a noncancelable order of equal value to be placed at the time of return. All items received that are not in their original box shall be subject to an additional 15% repackaging fee.
FREIGHT: Returns will be made freight prepaid by the IDC Owner-Distributor to the IDC Distribution Center. The packing slip and all cartons must reference the RMA number. The owner-distributor will be notified of any items received that do not qualify as set forth above. Those items will not be credited and shall be scrapped unless the IDC Owner-Distributor directs otherwise and assumes any additional transportation charges.