We never sell your data to third parties
Image for Illustration purposes only. Actual product may vary
$13,524.10 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable:No
Amperage Rating
10.5 A
Flow Rate
120 cu-in/min
Frequency Rating
60 Hz
HP
3 hp
Number of Stages
2
Overall Height
25-1/8 in
Overall Length
15-1/2 in
Overall Width
14-1/4 in
Pressure Rating
100 to 10000 psi
Reservoir Capacity
1250 cu-in
Series
PQ120
Speed
1725 rpm
Voltage Rating
230/460 VAC
120 cu. in. min. Designed specifically for heavy duty, extended cycle operation up to 400 Ton.
- Start and operate under full load, even with voltage reduced 10%.
- Electrical shut-down feature prevents unintentional restarting of motor following an electrical service interruption.
- Internal relief valve limits pressure to 10,000 psi. External relief valve is adjustable from 1,000 to 10,000 psi.
- Pump wired at factory with a 3hp, 460 volt, 60 Hz, 3 Phase motor. Other electrical configurations are available.
- 24 volt control circuits on units with remote controls for added user/operator safety.
- 3 hp (3 phase) motor with thermal overload protection. Motor starter and heater element supplied as standard equipment; no hidden charges!
- Metal shroud keeps dirt and moisture out of motor and electrical components.
- Pumps operate below maximum OSHA noise limitation.
Specifications
| Order No. | PQ1204S |
|---|---|
| For Use with Cyl. Type | Double-Acting |
| Description | PQ1204, except has solenoid operated remote valve. |
| Valve Type | 4-Way |
| Valve No. | 9512 |
| Valve Function | Advance Hold Return |
| Max. Amp Draw @ 10,000 (psi) | 230V -10. 5 amps 460V -5. 3 amps |
| Motor | 3 hp, 460 Volt 60 Hz, 3 Phase |
| Motor | 1, 250 |
SKU: 1966869
Mro product supply
Thanks MROSUPPLY, fair prices and good stock, fast shipping and communication. Always the first stop for tooling and supplies.
Read more
| Brand | Timken |
| Model | 2MMC9130WI SUH |
| Brand | Cutler Hammer |
| Model | 1391A-6501 |
| Brand | INA Bearing |
| Model | GE25FO2RS |
| Brand | Consolidated Bearings |
| Model | 81260 M |
| Brand | Pramet |
| Model | 7809780 |
| Brand | MagPowr |
| Model | LTS2SWEC12M |
SKU: 1966869
Mro product supply
Thanks MROSUPPLY, fair prices and good stock, fast shipping and communication. Always the first stop for tooling and supplies.
Read moreDisclaimer: The return policy information shown below is merely a copy of the text as stated in IDC-USA's Annual Return Policy.
File: http://documents.mrosupply.com/file_uploads/IDCreturnpolicy.pdf
ANNUAL RETURN POLICY PURPOSE: The purpose of IDC-USA’s Annual Return Policy is to allow IDC Distributors the opportunity to return salable stock merchandise of current design that may not have adequate “turns” and replace it with faster moving product.
ACCEPTANCE: IDC Owner-Distributors shall submit a return list to IDC-USA with all pertinent information as follows:
a. Product brand name
b. Quantity
c. IDC-USA’s product identification number
d. Corresponding distributor’s P.O. number or invoice number Acceptance of return shall be subject to IDC-USA inventory levels and manufacturer’s restrictions.
AUTHORIZATION: The return shall be audited and the IDC Owner-Distributor will receive an approved return list with a Return Material Authorization (RMA) number assigned to it. RETURN DATE: Each owner-distributor shall be assigned a month during which they shall be entitled to make a single annual return.
Product Qualification: All products returned must be:
a. On the current price list
b. In good resale condition
c. In the original packaging
d. Purchased from IDC-USA within 3 years of the return
e. Stock items only; no special order items
f. Only those items which have been approved
VALUE: The IDC Owner-Distributor shall receive a credit not to exceed 5% of the owner-distributor’s prior year annual purchases from the IDC Distribution Center. Credit received shall be the actual purchase price or price in effect at the time of the return, whichever is lowest, less applicable restocking charges. Additionally, all annual returns must have a minimum return value of $100.
RESTOCKING CHARGES: There will be a 15% restocking fee unless return is offset by a noncancelable order of equal value to be placed at the time of return. All items received that are not in their original box shall be subject to an additional 15% repackaging fee.
FREIGHT: Returns will be made freight prepaid by the IDC Owner-Distributor to the IDC Distribution Center. The packing slip and all cartons must reference the RMA number. The owner-distributor will be notified of any items received that do not qualify as set forth above. Those items will not be credited and shall be scrapped unless the IDC Owner-Distributor directs otherwise and assumes any additional transportation charges.