We never sell your data to third parties
Image for Illustration purposes only. Actual product may vary
Power Team 100888-230 electric hydraulic pump delivers 1 HP at 230 VAC with a rated speed of 1725 RPM. This palletized system provides a maximum operating pressure of 5000 PSI. The pump measures 11.5 inches wide by 14.125 inches long.
MODEL 100888-230
Contact supplier for technical support on: 800 477 8326
$3,808.85 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable:No
Input Voltage (vac)
230
Length (in)
14.125
Max Operating Pressure (psi)
5000
Power Dissipation (hp)
1
Rated Speed (rpm)
1725
Type
Palletized_System
Width (in)
11.5
This is Hytec popular 1 hp, totally enclosed-fan cooled induction motor pump, outfitted to operate Hytec single acting manual pallet valves. To pressurize the clamping components on the pallet, simply start the pump using the remote hand switch. It runs until its pressure setting is reached, then stops automatically and drops pressure. The coupler and hose may now be easily disconnected and later reconnected. The output of this gerotor/axial piston pump is controlled by a pressure switch and externally adjustable pressure regulator, both adjustable from 1, 000 to 5, 000 psi. It is shipped with a coupler and 2 gal of hydraulic oil. Order a hose to fit your application separately.
- NEMA 12 electrical enclosure and controls
- Drip/chip cover
- Liquid filled gauge
- Dual carrying handle
- Thermal overload protection
- TEFC motor
- Filtered filler/breather cap
SKU: 1966869
Mro product supply
Thanks MROSUPPLY, fair prices and good stock, fast shipping and communication. Always the first stop for tooling and supplies.
Read moreBrand
Hydraulic Technologies
Model
100879-230
Brand
Hydraulic Technologies
Model
100907
Brand
Hydraulic Technologies
Model
100879
Brand
Hydraulic Technologies
Model
100857
Brand
Hydraulic Technologies
Model
100908
| Brand | SMC |
| Model | MKB20-10LZ-M9BWSAPC |
| Brand | JW Winco |
| Model | 743.1-32-M42X1.5-B |
SKU: 1966869
Mro product supply
Thanks MROSUPPLY, fair prices and good stock, fast shipping and communication. Always the first stop for tooling and supplies.
Read moreDisclaimer: The return policy information shown below is merely a copy of the text as stated in IDC-USA's Annual Return Policy.
File: http://documents.mrosupply.com/file_uploads/IDCreturnpolicy.pdf
ANNUAL RETURN POLICY PURPOSE: The purpose of IDC-USA’s Annual Return Policy is to allow IDC Distributors the opportunity to return salable stock merchandise of current design that may not have adequate “turns” and replace it with faster moving product.
ACCEPTANCE: IDC Owner-Distributors shall submit a return list to IDC-USA with all pertinent information as follows:
a. Product brand name
b. Quantity
c. IDC-USA’s product identification number
d. Corresponding distributor’s P.O. number or invoice number Acceptance of return shall be subject to IDC-USA inventory levels and manufacturer’s restrictions.
AUTHORIZATION: The return shall be audited and the IDC Owner-Distributor will receive an approved return list with a Return Material Authorization (RMA) number assigned to it. RETURN DATE: Each owner-distributor shall be assigned a month during which they shall be entitled to make a single annual return.
Product Qualification: All products returned must be:
a. On the current price list
b. In good resale condition
c. In the original packaging
d. Purchased from IDC-USA within 3 years of the return
e. Stock items only; no special order items
f. Only those items which have been approved
VALUE: The IDC Owner-Distributor shall receive a credit not to exceed 5% of the owner-distributor’s prior year annual purchases from the IDC Distribution Center. Credit received shall be the actual purchase price or price in effect at the time of the return, whichever is lowest, less applicable restocking charges. Additionally, all annual returns must have a minimum return value of $100.
RESTOCKING CHARGES: There will be a 15% restocking fee unless return is offset by a noncancelable order of equal value to be placed at the time of return. All items received that are not in their original box shall be subject to an additional 15% repackaging fee.
FREIGHT: Returns will be made freight prepaid by the IDC Owner-Distributor to the IDC Distribution Center. The packing slip and all cartons must reference the RMA number. The owner-distributor will be notified of any items received that do not qualify as set forth above. Those items will not be credited and shall be scrapped unless the IDC Owner-Distributor directs otherwise and assumes any additional transportation charges.