We never sell your data to third parties
Taylor Pneumatic T-7891A 3/16" capacity heavy-duty long-nose air-over-hydraulic riveter with 2,300 lb pulling force and adjustable stroke up to 9/16". 10.25" body, 3.5 lb weight, 1/4" NPT air inlet, 90 PSI max. Long-nose design for extended reach in blind-rivet setting applications.
MODEL T-7891A
Contact supplier for technical support on: 800-805-8665
$419.87 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable:No
Air Inlet NPT (in)
1/4
Height (in)
10.25
Max Air Pressure (psi)
90
Pulling Force
2,300
Rivet Capacity (in)
3/16
Stroke (in)
to 9/16
Weight (lb)
3.5
Specifications
| Capacity | 3/16" |
|---|---|
| Pulling force | 2,300 lbs. |
| Stroke | Adjustable to 9/16" |
| Height | 10 1/4" |
| Weight | 3.12 |
| Air Inlet | 1/4" NPT |
| Air Pressure | 90 PSI Max. |
These tool has an extended nose for those hard to reach fasteners. Pulls 1/8", 5/32", 3/32" and 3/16 rivets. (no monobolts)
SKU: 2306820
T-7781 palm hammer
I purchased the Taylor T-7781 Palm Hammer and received it in a timely manner and without damage. The packaging was robust and secure and included a nice catalog of the many other tools available. The palm hammer is made in Taiwan and appears to be well-made and of good quality. It came with the rubber pad installed which I swapped out for the hardened steel pad since I am using it for doing some panel beating in my project car. I have not used it extensively but so far it has performed very well with no hiccups. I also appreciated the website - very professional and simple to use plus I could track delivery. Based on my experience so far, I would definitely recommend this supplier for future tool purchases.
Read more
#320598
Brand
SKF Bearing
Model
6309 2RSJEM
#39416
Brand
Boston Gear
Model
APM933AT-B
#24584
Brand
Baldor
Model
JML1409T
#321972
Brand
SKF Bearing
Model
23284 CA/C3W33
#6555772
Brand
Consolidated Bearings
Model
SY-30 SD
SKU: 2306820
T-7781 palm hammer
I purchased the Taylor T-7781 Palm Hammer and received it in a timely manner and without damage. The packaging was robust and secure and included a nice catalog of the many other tools available. The palm hammer is made in Taiwan and appears to be well-made and of good quality. It came with the rubber pad installed which I swapped out for the hardened steel pad since I am using it for doing some panel beating in my project car. I have not used it extensively but so far it has performed very well with no hiccups. I also appreciated the website - very professional and simple to use plus I could track delivery. Based on my experience so far, I would definitely recommend this supplier for future tool purchases.
Read more