We never sell your data to third parties
Deublin 1121-910-913 rotary union with M5x0.8 right-hand rotor connection and 0.216" pilot, designed for MQL, cutting oil, and coolant service. Coolant rated to 3000 psi at 160 °F, MQL to 150 psi at 160 °F. Housing connection is M5x0.8 metric thread. Suitable for machine-tool through-spindle applications requiring compact, high-pressure fluid transfer.
MODEL 1121-910-913
Contact supplier for technical support on: appeng@deublin.com
$1,255.00 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable: Yes
Coolant Max Flow (gpm)
0.6
Coolant Max Flow (l/min)
2.3
Coolant Max Pressure (bar)
207
Coolant Max Pressure (psi)
3000
Coolant Max Temperature (°C)
71
Coolant Max Temperature (°F)
160
Housing Connection (in)
M5x0.8 Metric Thread
Media
MQL, Cutting Oil, Coolant
MQL Max Flow (cfm)
2.1
MQL Max Flow (l/min)
61
MQL Max Pressure (bar)
10
MQL Max Pressure (psi)
150
MQL Max Temperature (°C)
71
MQL Max Temperature (°F)
160
Rotor Connection (in)
M5x0.8 RH, 0.216 pilot
Rotor Connection (mm)
M5x0.8 RH, 5.496 pilot
- Single passage for coolant or MQL
- Pop-Off™ technology allows unlimited dry running without media pressure
- Ultra-short 0.1 mm pop-off stroke restricts drainage of residual coolant during tool change
- Full-flow design has no obstructions to trap swarf or debris
- Balanced mechanical seals made from silicon carbide for long life even under difficult operating conditions
- Anodized aluminum housing resists corrosion
| A | M5x0.8 RH |
|---|---|
| B | M5x0.8 Metric Thread |
| C | 15.5 mm |
| C | 0.61" |
| D1 | 42 mm |
| D1 | 1.654" |
| E | 0.602" |
| E | 15.3 mm |
| F | 13 mm |
| F | 0.512" |
| G | 0.063" |
| G | 1.6 mm |
| H | 8 mm |
| H | 0.315" |
| I | 0.216" |
| I | 5.496 mm |
| J | 30 mm |
| J | 1.181" |
| X | 0.101" |
| X | 2.57 mm |
| Media | MQL, Cutting Oil, Coolant |
|---|---|
| Rotor Connection | M5x0.8 RH, 5.496 mm pilot |
| Rotor Connection | M5x0.8 RH, 0.216" pilot |
| Housing Connection | M5x0.8 Metric Thread |
| Coolant Flow | 0.6 GPM |
| Coolant Flow | 2.3 l/min |
| Coolant Pressure | 207 bar |
| Coolant Pressure | 3000 psi |
| Coolant Temperature | 71 °C |
| Coolant Temperature | 160 °F |
| Cutting Oil Flow | 0.6 GPM |
| Cutting Oil Flow | 2.3 l/min |
| Cutting Oil Pressure | 207 bar |
| Cutting Oil Pressure | 3000 psi |
| Cutting Oil Temperature | 71 °C |
| Cutting Oil Temperature | 160 °F |
| MQL Flow | 2.1 CFM |
| MQL Flow | 61 l/min |
| MQL Pressure | 10 bar |
| MQL Pressure | 150 psi |
| MQL Temperature | 71 °C |
| MQL Temperature | 160 °F |
SKU: 98659
Good products
Thank you, received the products faster than expectation, good products ans Original. Recomended.
Read more
SKU: 98659
Good products
Thank you, received the products faster than expectation, good products ans Original. Recomended.
Read more