We never sell your data to third parties
AirTAC 2S40040BI 2SA Series 2/2-Way Solenoid Fluid Control Valve 1 1/2" port DC24V
MODEL 2S40040BI
Obsolete
This item is no longer available on MROSupply.com, however we have this identical replacement.
View Replacement
Typically Ships in: 1 day
Returnable: Yes
Dimensions
98mm(L) × 45mm(W) × 55mm(H)
Electrical Entry
Grommet
Flow coefficient (Cv)
4.0
Hysteresis
≤0.1 MPa
Max flow rate
1500 NL/min
Model
2S
Operating pressure
29–145 psi
Port Size
1 1/2"
Port thread depth
12mm (minimum engagement)
Power consumption
2.8W (DC), 4.5Va (AC)
Pressure Condition
Standard
Protection rating
IP67 (coil), IP40 (valve body)
Response time
≤15ms (excitation), ≤20ms (de-energization)
Seal material
Heat-resistant NBR (Nitrile)
Size Series
Orifice 40mm
Special Suffix
Standard
Temperature range
-5°C to 80°C (non-freezing)
Thread Type
PT
Type
4-way, 5-port direct-acting solenoid valve
Voltage
DC24V
AirTAC 2S40040BI 2SA Series 2/2-way (two-port, two-position) normally-closed solenoid valve for air, water, oil, and other neutral media. Size series Orifice 40mm with 1 1/2" port. Coil voltage DC24V. Electrical entry: Grommet. PT thread. Small sizes are direct-acting while larger sizes use internal pilot operation for reliable on/off media control.