We never sell your data to third parties
AirTAC 2S50050AI 2SA Series 2/2-Way Solenoid Fluid Control Valve 2" port AC220V
MODEL 2S50050AI
Obsolete
This item is no longer available on MROSupply.com, however we have this identical replacement.
View Replacement
Typically Ships in: 1 day
Returnable: Yes
Coil insulation class
Class F (155°C)
Dimensions
120mm(L) × 50mm(W) × 95mm(H) (excluding mounting brackets)
Electrical connection
DIN43650 Form A connector
Electrical Entry
Grommet
Flow capacity
850 L/min (ANR)
Model
2S
Operating pressure range
0.2–1.0 MPa
Port configuration
5/2-way
Port Size
2"
Port spacing
25mm center-to-center vertical ports
Port thread size
G1/8 (ISO228 standard)
Pressure Condition
Standard
Proof pressure
1.5 MPa
Protection rating
IP67 (coils), IP40 (valve body)
Response time
≤15ms (excitation), ≤20ms (reset)
Seal material
HNBR (Hydrogenated Nitrile) with PTFE wear rings
Size Series
Orifice 50mm
Special Suffix
Standard
Temperature tolerance
-10°C to 80°C (with silicone seals optional up to 120°C)
Thread Type
PT
Type
5-port 2-position directional valve (Double solenoid)
Voltage
AC220V
AirTAC 2S50050AI 2SA Series 2/2-way (two-port, two-position) normally-closed solenoid valve for air, water, oil, and other neutral media. Size series Orifice 50mm with 2" port. Coil voltage AC220V. Electrical entry: Grommet. PT thread. Small sizes are direct-acting while larger sizes use internal pilot operation for reliable on/off media control.
| Brand | AirTAC |
| Model | 7SV12006CDG |