We never sell your data to third parties
AirTAC 2ST05010BI 2SA Series 2/2-Way Solenoid Fluid Control Valve 3/8" port DC24V
MODEL 2ST05010BI
Obsolete
This item is no longer available on MROSupply.com, however we have this identical replacement.
Typically Ships in: 1 day
Returnable: Yes
Ambient temperature range
-20°C to 80°C
Dimensions
80mm(L) × 50mm(W) × 40mm(H)
Electrical Entry
Grommet
Electrical protection
Class F insulation, surge suppression circuit
Flow capacity
850 l/min (ANR) at 0.5 MPa
Manual override
Built-in emergency operation button
Model
2S
Operating pressure range
0.2–0.8 MPa
Port configuration
G1/8 (ISO228-1 standard)
Port Size
3/8"
Pressure Condition
Extra large volume
Protection rating
IP67 (dust/water resistant)
Response time
≤15ms (energize), ≤20ms (de-energize)
Seal material
Heat-resistant NBR (Nitrile) compound
Service life
≥10 million cycles (at rated conditions)
Size Series
050 Series
Special Suffix
Standard
Thread Type
PT
Type
5-port 2-position (5/2-way) solenoid valve
Voltage
DC24V
AirTAC 2ST05010BI 2SA Series 2/2-way (two-port, two-position) normally-closed solenoid valve for air, water, oil, and other neutral media. Size series 050 Series with 3/8" port. Coil voltage DC24V. Electrical entry: Grommet. PT thread. Small sizes are direct-acting while larger sizes use internal pilot operation for reliable on/off media control.
| Brand | AirTAC |
| Model | PC1204-S |
| Brand | AirTAC |
| Model | ACQD16X45 |
| Brand | AirTAC |
| Model | 4V330E10CI |