We never sell your data to third parties
AirTAC 2ST05015CI 2SA Series 2/2-Way Solenoid Fluid Control Valve 1/2" port AC110V
MODEL 2ST05015CI
Obsolete
This item is no longer available on MROSupply.com, however we have this identical replacement.
Typically Ships in: 1 day
Returnable: Yes
Body material
Anodized aluminum alloy (ISO-AlSi10Mg)
Dimensions
80mm(L) × 40mm(W) × 35mm(H)
Electrical Entry
Grommet
Manual override
Built-in push-button override
Max flow rate
1200 L/min (Cv=1.8)
Model
2S
Operating pressure range
0.2–0.8 MPa
Port Size
1/2"
Porting pattern
ISO 5599-1 standard
Pressure Condition
Extra large volume
Protection rating
IP67 (coil), IP40 (valve body)
Response time
≤25ms (excitation), ≤35ms (reset)
Seal material
HNBR rubber (NBR optional)
Size Series
050 Series
Special Suffix
Standard
Temperature range
-20°C to 80°C (non-freezing)
Thread Type
PT
Type
3-position, 5-way closed center (Double solenoid)
Voltage
AC110V
Voltage options
DC12V/24V, AC110V/220V (coil interchangeable)
AirTAC 2ST05015CI 2SA Series 2/2-way (two-port, two-position) normally-closed solenoid valve for air, water, oil, and other neutral media. Size series 050 Series with 1/2" port. Coil voltage AC110V. Electrical entry: Grommet. PT thread. Small sizes are direct-acting while larger sizes use internal pilot operation for reliable on/off media control.
| Brand | Bosch Rexroth |
| Model | R902511921 |
| Brand | AirTAC |
| Model | GPH401D |
| Brand | AirTAC |
| Model | 2KSA32032B |
| Brand | Bosch Rexroth |
| Model | 3842537101 |
| Brand | AirTAC |
| Model | 4V330P08B |
| Brand | NSK Bearings |
| Model | NJ211ETC3 |
| Brand | AirTAC |
| Model | LSD25BK-F3S-H-D-SM6-E |