We never sell your data to third parties
AirTAC 2WT03006B 2W Solenoid Fluid Control Valve 1/8" port DC24V PT thread
MODEL 2WT03006B
Obsolete
This item is no longer available on MROSupply.com, however we have this identical replacement.
Typically Ships in: 1 day
Returnable: Yes
Dimensions
82mm(L) × 45mm(W) × 78mm(H) (excluding connectors)
Electrical Entry
Terminal
Flow coefficient (Cv)
2.3
Housing material
Die-cast aluminum with epoxy coating
Max flow rate
2000 L/min (ANR) at 0.5 MPa
Model
2W
Operating pressure
21.7–145 psi
Port alignment
30mm center-to-center spacing
Port Size
1/8"
Power consumption
2.2W (DC), 4.5Va (AC)
Pressure Condition
Extra large volume
Protection rating
IP67 (dustproof & temporary immersion resistant)
Response time
≤15ms (energize), ≤20ms (de-energize)
Seal material
HNBR (Hydrogenated Nitrile) for enhanced oil resistance
Size Series
030 Series
Temperature range
-20°C to 80°C (with intermittent peaks to 100°C)
Thread Type
PT
Type
5/3-way direct-operated (center closed position)
Voltage
DC24V
Voltage options
DC24V (±10%), AC110V (50/60Hz), AC220V (50/60Hz)
AirTAC 2WT03006B 2W Series direct-acting, normally-closed 2/2-way solenoid valve, 1/8" port rated at DC24V, for on/off control of water, air and oil. Direct actuation opens the orifice the instant the coil energizes and closes it on de-energization for reliable shutoff, in the 030 Series size rated for Extra large volume service, with Terminal electrical connection and PT port and connection threads.
| Brand | AirTAC |
| Model | LSDB35BK-F1N-N-SD-SM6-E |
| Brand | Bosch Rexroth |
| Model | R039907031 |
| Brand | NSK Bearings |
| Model | H306 |
| Brand | Bosch Rexroth |
| Model | R161981510 |