We never sell your data to third parties
AirTAC 2WT05010FI 2W Solenoid Fluid Control Valve 3/8" port DC12V PT thread
MODEL 2WT05010FI
Obsolete
This item is no longer available on MROSupply.com, however we have this identical replacement.
Typically Ships in: 1 day
Returnable: Yes
Dimensions
140mm(L) × 55mm(W) × 97mm(H)
Electrical Entry
Grommet
Flow coefficient (Cv)
6.5
Max flow rate
5, 000 L/min (ANR)
Model
2W
Operating pressure
0.05–1.0 MPa
Port Size
3/8"
Port thread depth
15mm (minimum engagement)
Power consumption
≤4.5W (DC24V), ≤6.5Va (AC)
Pressure Condition
Extra large volume
Protection rating
IP67 (dust/water resistant)
Response time
≤50ms (open/close cycle)
Seal material
FKM fluorocarbon (standard) / EPDM optional
Size Series
050 Series
Temperature range
-10°C to 80°C (with FKM seals)
Thread Type
PT
Type
5/3-way closed center (pilot-operated)
Voltage
DC12V
Voltage options
DC24V (±10%), AC110V (50/60Hz), AC220V (50/60Hz)
AirTAC 2WT05010FI 2W Series direct-acting, normally-closed 2/2-way solenoid valve, 3/8" port rated at DC12V, for on/off control of water, air and oil. Direct actuation opens the orifice the instant the coil energizes and closes it on de-energization for reliable shutoff, in the 050 Series size rated for Extra large volume service, with Grommet electrical connection and PT port and connection threads.
| Brand | NSK Bearings |
| Model | WBK40DFD-31H |
| Brand | NSK Bearings |
| Model | M-C003SDP13 |
| Brand | NSK Bearings |
| Model | W11 |
| Brand | NSK Bearings |
| Model | M-C004SDP03 |
| Brand | NSK Bearings |
| Model | M-C030WDP13 |
