We never sell your data to third parties
AirTAC DMSG-030-W CMS/DMS Series Magnetic Sensor 2-wire G-section Cylinder-Mounted Position Switch
MODEL DMSG-030-W
$11.10 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable: Yes
Additional Spec
General type
Cable specification
2m PUR shielded cable (M8 connector optional)
Cross Section
G
Current consumption
≤15mA
Dimensions
30mm(L) × 15mm(W) × 40mm(H)
Housing material
Nickel-plated brass
Hysteresis
≤15% of sensing distance
Model
DMS
Output Type
2-wire
Protection rating
IP67 (Iec 60529)
Response frequency
1kHz
Sensing distance
2mm ±10% (Iron target)
Shock resistance
100m/s2 (3 times each axis)
Supply voltage
DC 10-30V (±10% ripple)
Temperature range
-25°C to +70°C (operating), -40°C to +85°C (storage)
Type
Inductive proximity sensor (NO/NC configurable)
Vibration resistance
10-55Hz @ 1.5mm amplitude
Waterproof Body
Standard body
AirTAC DMSG-030-W CMS/DMS Series magnetic sensor, a cylinder-mounted position switch that detects the piston magnet to signal end-of-stroke. CMS uses a reed (mechanical contact) element and DMS uses a solid-state Hall element, here wired as 2-wire in G-section body to fit the cylinder mounting groove (Standard body). It mounts directly to AirTAC pneumatic cylinders for reliable position sensing in automation.
| Brand | Bosch Rexroth |
| Model | R902505270 |
| Brand | Bosch Rexroth |
| Model | R109634035 |