We never sell your data to third parties
Bosch Rexroth R072001280 TORQUE RESIST.BUSH KBDRC1-12-WV-400
MODEL R072001280
$404.50 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable: Yes
Dimension B (profiled rail systems) [mm]
32
Dimension D [mm]
22
Dimension M1 [mm]
8
Dimension N1 (profiled rail systems) [mm]
14.4
Dimension N2 (profiled rail systems) [mm]
1.3
Dynamic Load Capacity C
640
Dynamic load capacity C [N]
640.0
Dynamic Torsional Moment Load Capacity Mt
2
Dynamic torsional moment load capacity Mt [Nm]
2.0
Filter For Linear Bushings And Shafts
Linear bushings
Format of linear bushings
– Closed
Format Of Linear Bushings
– Closed
Length of linear bushing [mm]
32.0
Linear Guide Type
Linear bushing and shaft
Mass M (Kg/M)
0.89
Max. Acceleration Amax
150
Maximum acceleration rate amax [m/s²]
150.0
Maximum Permissible Linear Speed Vmax
3
Maximum permissible linear speed vmax [m/s]
3.0
Outer Diameter D
22
Outer diameter D [mm]
22.0
Permissible Ambient Temperature
-10 °C ... +80 °C
Permissible Ambient Temperature (Max)
+ 80
Permissible Ambient Temperature (Min)
- 10
Raceway grooves
1
Seal
Without wiper seals
Series
Torque-resistant compact
Shaft Diameter D
12
Shaft diameter d [mm]
12.0
Size B
32
Size D
22
Size M1
8
Size N1
14.4
Size N2
1.3
Standard length l of the shaft [mm]
400
Static load capacity C0 [N]
420.0
Static Load Rating C0
420
Type
Linear bushing
Version
Standard
Torque-resistant compact linear bushing (standard)
Ball guide grooves = 1
Shaft diameter d = 12
Without seal
Shaft included
400 = standard length as per table
- For self-supporting, torsionally stiff guides with only one shaft
- Torque-resistant linear bushings with adjusting screw come set to zero clearance
- Matching shaft profiles with machined ball guide grooves
- Precision steel shaft with a ball guide groove for shaft diameters 12 and 16 mm, with two ball guide grooves from shaft diameter 20 mm
- Hardened steel bearing plates
- Balls made of rolling bearing steel
- Hardened steel adjusting screw
- Steel lock nut
- Ball retainer and outer sleeve made of PA or POM
