We never sell your data to third parties
Image for Illustration purposes only. Actual product may vary
SKF Bearing TLSD 250/HB2 DIST Greases
MODEL TLSD 250/HB2
$208.47 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable: See conditions
Ambient Temperature Range
0-50 °C
Battery
Battery pack, TLSD 1-BAT
Battery Capacity
2.7 A·h
Battery Type
Alkaline manganese
Battery Voltage
4.5 V
Connecting Thread
G 1/4
Degree of Protection (IP)
IP 65
Drive Mechanism
Electro mechanical
Highest Dispense Setting
8.3 ml/d
Lowest Dispense Setting
0.7 ml/d
Lubricant
LGHB 2
Lubricant Description
High viscosity, high loads and high temperatures grease
Lubricant Operating Temperature Range
–20 to +150 °C
Lubricant Quantity
250 ml
Maximum Feed Line Length
3 m
Maximum Pressure
5 bar
Nominal Emptying Time
User adjustable: 1, 2, 3, 4, 6, 8, 10 and 12 months
Pack Height
255 mm
Pack Length
74 mm
Pack Width
74 mm
Power Source
Battery pack
Electro-mechanical single point lubricator
TLSD 250/HB2 is filled with SKF LGHB 2 grease for high loads, wet environments and high temperatures, recommended for plain bearings, conveyors and applications with high loads and low speeds. Our electro-mechanical single point automatic lubricators are available in many configurations, pre-filled with SKF lubricants, both as battery or cable driven. Using automatic lubricators improves employee safety, increases machine reliability and optimizes maintenance operations.
- Flexible dispense rate from 1 to 12 months
- Maximum discharge pressure of 5 bar during the dispensing period
- LED status indicators
- Compact size allows installation in restrictive areas
- Suitable for both direct and remote installation
- Supplied with support flange for enhanced sturdiness
| Brand | MROSupply Fasteners |
| Model | FSTPCK-355080 |
| Brand | RAB Lighting |
| Model | T8-35-84P2S-865-DE-BYP |
Disclaimer: The return policy information shown below is merely an excerpt from SKF's General Conditions of Sale.
RETURN OF GOODS FOR CREDIT
Goods will not be accepted for return without prior written approval from SKF. The return freight must be prepaid by the Buyer. Unless return of Goods is due to Supplier error, Goods returned will be subject to a credit service fee of $25.00 or 15% of the credit value, whichever is greater. An additional service fee may apply is further inspection is required at the discretion of SKF