We never sell your data to third parties
Image for Illustration purposes only. Actual product may vary
JET 708524 JPM-13CS 13" Closed Stand Planer / Molder 1-1/2HP 1Ph 115/230V
MODEL 708524
This vendor has a minimum order quantity of 2. Order minimum ($) may be applied. Add desired QTY to cart and proceed to checkout to view minimum
Contact supplier for technical support on: 833 383 6800
$1,979.00 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Brand Minimum Order Quantity: 2
Typically Ships in: 1 day
Returnable: Yes
Cutterhead Speed (RPM)
4500
Dust Port Outside Diameter (In.)
4
Feed Rate - Molding (FPM)
10
Height
0.0000
Length
0.0000
Maximum Planing Thickness (In.)
6-1/8
Motor Amps
15/7.5
Motor Power (HP)
1-1/2
Number of Knives
3
Prewired Voltage (V.)
115
Style (Type)
Planer/Molder
Width
0.0000
The JET JPM-13CS 13" closed stand planer / Molder boasts a 1.5 hp motor. The sturdy cast iron table and base provide strength and reduce vibration during use. The three cutter head design produces a superior finish. Built in lockable caster add support and stability to the machine while allowing it to be maneuverable.
JET Closed Stand Planer/Molder, Bare Tool, 13 in Cutting Width, 1/16 in Depth of Cut, 13500 cpm Cuts per Minute, 20 fpm Planning, 10 fpm Molding fpm Feed Rate, 3 Cutting Knives, 4500 rpm Speed, 2 Speed, 14 in Minimum Planing Length, 1-1/2 hp, 115/230 VAC, 15/7.5 A, Cast Iron, 43-1/2 in H x 24 in W x 36-1/2 in D Dimensions
Features
- Cast iron table and base provide strength and reduce vibration during use
- Four precision ground column design feature adds stability when raising and lowering the table
- Three cutter head design produces a superior finish in either application
- Two-speed gear box has feed rates set for optimum planning and molding results
- Molding cutter head accommodates over 40 standard molding cutter sets, most 2 in or smaller heads can be installed without removing the planning knives to save you set up time
- Infeed and out feed rollers are adjustable and rubber coated to support your workpiece without marring the wood
- Top mounted height adjustment handle is easy to use for quick table height changes
- Totally enclosed fan cooled motor uses two matched V-belts to deliver smear, consistent power to the cutter head
- Exclusive angled 4 in dust port keeps the dust hose out of the way while providing efficient chip and dust removal
- Built-in lockable casters add support and stability to machine while in use
Includes: Knife Setting Gauge for Planing, Knife Setting Gauge for Molding and Adjustment Tools
SKU: 6106466
Rating of purchase of jet drum sander
First, the bad part. It took months to get this machine. As the estimated shipment date drew near, it was pushed be a week. Disappointment! However, I understand the supply chain issues under the current administration and do not fault the company. From the date of shipment notification, the lapse time was approximately 3 days. It arrived in a crate and was well packed within. On the fourth day it was assembled and put into use. This drum sander functions great. It is a replacement for a Delta drum sander I had prrchased 20 years ago. It was destroyed by movers when we moved to TX. Originally, I purchased another Delta sander, however, when it arrived I discovered that it basically had no warranty It went back. This sander is well made and I expect will last another 20 years. Whenever I contacted MRO with a question, they were courteous and prompt in providing me with the answer. I would definitely consider future purchases with them.
Read more
| Brand | Eklind |
| Model | 15930 |
| Brand | JET Tools |
| Model | 708599 |
| Brand | JET Tools |
| Model | 714650 |
| Brand | JET Tools |
| Model | 414226 |
| Brand | JET Tools |
| Model | 577842 |
| Brand | Eklind |
| Model | 15007 |
| Brand | JET Tools |
| Model | 414475 |
SKU: 6106466
Rating of purchase of jet drum sander
First, the bad part. It took months to get this machine. As the estimated shipment date drew near, it was pushed be a week. Disappointment! However, I understand the supply chain issues under the current administration and do not fault the company. From the date of shipment notification, the lapse time was approximately 3 days. It arrived in a crate and was well packed within. On the fourth day it was assembled and put into use. This drum sander functions great. It is a replacement for a Delta drum sander I had prrchased 20 years ago. It was destroyed by movers when we moved to TX. Originally, I purchased another Delta sander, however, when it arrived I discovered that it basically had no warranty It went back. This sander is well made and I expect will last another 20 years. Whenever I contacted MRO with a question, they were courteous and prompt in providing me with the answer. I would definitely consider future purchases with them.
Read more