Dake 983112-2 SE-10 DM Hydraulic controlled dual mitering bandsaw 220-volt 3 phase Horizontal Pedestal Stationary Bandsaws

Features

• Hydraulic controlled down feed with adjustable manual return
• Automatic shut off at the end of the cut
• Dual operating modes with head descent control lock switch. Pre-set the down feed and shut switch so down feed does not need resetting after each cut
• Powerful, flame tempered, manual clamping vise. Hand wheel adjusted with quick release lever for rapid vise opening and closing action. The vise clamps material firmly
• Traversing vise can be used left or right of the blade
• Ergonomic designed for operators comfort and control
• Gearbox is direct bolted to the bow for less vibration, and positive drive gear box is direct driven via steel and bronze gears, no belts and pulleys to contend with
• CE Certified electronics. Low voltage switches. Thermo over load protection, low voltage protection with low voltage trigger motor start switch and blade cover interlock
• Blade tensioning is done via. A hand wheel and color coded gauge tensioning system taking the guesswork out of tensioning
• Miters up to 60 degree right / 45 degrees left. Mitering pre-sets with flip up and pin stops makes set up fast and has precise with miter scale for all angles in between. The head turns-the material doesnt
• Horizontally mounted guide arms for more rigidity and straightest cuts. Guides are rollers with carbide inserts that are fully adjustable and replaceable
• Electric coolant pump and self-contained coolant system
• Steel fabricated base, and stock stop gauge

Standard Equipment

• Steel base
• 1 standard bi-metal blade
• Traversing, manual vise
• Coolant
• Stock stop gauge