We never sell your data to third parties
Schunk 23000210 KOM HSK-A100 ?40x70
MODEL 23000210
$360.00 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable: Yes
Clamping diameter D1
40 mm
D2 [mm]
70.0
L11 [mm]
41.0
L12 [mm]
27.0
L4 [mm]
41.0
Projecting length L1 [mm]/[inch]
70 mm / 2.8"
Series
Combination shell and end mill adapters
Technology
Combination shell and end mill adapters
Thread tightening bolt G
M20
Toolholder interface
HSK-A 100
Toolholder standard
DIN ISO 12164-1
Description
KOM HSK-A100 Ø40x70, Toolholder- Combination Shell and End Mill Adapter
- Series: Combination Shell and End Mill Adapter
- Toolholder interface: HSK-A 100
- Clamping diameter: 40 mm
- Thread in clamping diameter: M20
- Projecting length: 70 mm
- Run-out accuracy: ≤ 0.006 mm measured from taper to D1
- Balancing grade: G2.5 at 25, 000 RPM or Umax < 1 gmm
Scope of delivery: Includes tightening bolt, drive ring, and feather key
General notes about the series
| Version | For mounting cutters with longitudinal or crosswise slot |
|---|---|
| Run-out accuracy | ≤ 0.006 mm measured from taper to D1 |
| Balancing grade | G2.5 at 25, 000 RPM or Umax < 1 gmm |
| Data carrier | Bore holes for data carriers according to DIN 69873 |
| Toolholder changes | For automatic toolholder changes |
| Scope of delivery | Includes tightening bolt, drive ring, and feather key |
Technical data KOM HSK-A100 Ø40x70
| ID: | 23000210 |
|---|---|
| Technology: | Combination Shell and End Mill Adapter |
| Series: | Combination Shell and End Mill Adapter |
| Toolholder interface: | HSK-A 100 |
| Toolholder standard: | DIN ISO 12164-1 |
| Clamping diameter D1: | 40 mm |
| Thread tightening bolt G: | M20 |
| D2 [mm]: | 70 |
| Projecting length L1 [mm]: | 70 |
| L4 [mm]: | 41 |
| L11 [mm]: | 41 |
| L12 [mm]: | 27 |
Brand
Browning
Model
767475
Brand
Sunex Tools
Model
812U
Brand
Hyde Tools
Model
S48900
Brand
Browning
Model
767623
Brand
RAB Lighting
Model
GNLED13NB
Brand
RAB Lighting
Model
STL360W