We never sell your data to third parties
$1,201.00 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable: Yes
Clamping diameter D1
32 mm
D2 [mm]
45.0
D3 [mm]
47.1
D4 [mm]
69.85
G
M10x1
L2 [mm]
61.0
L3 [mm]
10.0
L4 [mm]
45.0
L5 [mm]
108.0
L6 [mm]
130.95
Min. torque [Nm]
280.0
Projecting length L1 [mm]/[inch]
150 mm / 5.9"
Series
TRIBOS-S
Technology
Polygonal toolholders
Toolholder interface
CAT 50
Toolholder standard
ASME B5.50
Description
TRIBOS-S CAT50 Ø32x150, Toolholder
- Polygonal Toolholder
- Series: TRIBOS-S
- Toolholder interface: CAT 50
- Clamping diameter: 32 mm
- Projecting length: 150 mm
- Run-out accuracy: < 0.003 mm at 2.5 x D
- Balancing grade: G2.5 at 25, 000 RPM or Umax < 1 gmm
- Min. torque: 280 Nm
General notes about the series
| Version | Long, slim design |
|---|---|
| Run-out accuracy | < 0.003 mm at 2.5 x D |
| Balancing grade | G2.5 at 25, 000 RPM or Umax < 1 gmm |
| Tool shank quality | h6 |
| Intermediate sleeves | Additional shank diameters can be clamped using intermediate sleeves |
| Data carrier | Bore for data carrier as an option |
| Toolholder changes | For automatic toolholder changes |
| Coolant supply | Coolant supply according to ASME B5.50 Bores for form AF are sealed with set screws as transport safety |
| Length adjustment screw | With set-screw for axial length adjustment |
| Individual | Additional sizes and customized designs are available upon request |
Technical data TRIBOS-S CAT50 Ø32x150
| ID: | 0205448 |
|---|---|
| Technology: | Polygonal Toolholder |
| Series: | TRIBOS-S |
| Toolholder interface: | CAT 50 |
| Toolholder standard: | ASME B5.50 |
| Clamping diameter D1: | 32 mm |
| D2 [mm]: | 45 |
| D3 [mm]: | 47.1 |
| D4 [mm]: | 69.85 |
| Projecting length L1 [mm]: | 150 |
| L2 [mm]: | 61 |
| L3 [mm]: | 10 |
| L4 [mm]: | 45 |
| L5 [mm]: | 108 |
| L6 [mm]: | 130.95 |
| G: | M10x1 |
| Min. torque [Nm]: | 280 |