We never sell your data to third parties
$609.00 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable: Yes
Clamping diameter D1
25 mm
D2 [mm]
36.0
D3 [mm]
38.1
D4 [mm]
44.45
G
M10x1
L2 [mm]
57.0
L3 [mm]
10.0
L4 [mm]
45.0
L5 [mm]
47.2
L6 [mm]
70.95
Min. torque [Nm]
200.0
Projecting length L1 [mm]/[inch]
90 mm / 3.5"
Series
TRIBOS-S
Technology
Polygonal toolholders
Toolholder interface
CAT 40
Toolholder standard
ASME B5.50
Description
TRIBOS-S CAT40 Ø25x90, Toolholder- Polygonal Toolholder
- Series: TRIBOS-S
- Toolholder interface: CAT 40
- Clamping diameter: 25 mm
- Projecting length: 90 mm
- Run-out accuracy: < 0.003 mm at 2.5 x D
- Balancing grade: G2.5 at 25, 000 RPM or Umax < 1 gmm
- Min. torque: 200 Nm
General notes about the series
| Version | Long, slim design Optimum for light metal-cutting operations – consider the radial forces |
|---|---|
| Run-out accuracy | < 0.003 mm at 2.5 x D |
| Balancing grade | G2.5 at 25, 000 RPM or Umax < 1 gmm |
| Tool shank quality | h6 |
| Intermediate sleeves | Additional shank diameters can be clamped using intermediate sleeves |
| Data carrier | Bore for data carrier as an option |
| Toolholder changes | For automatic toolholder changes |
| Coolant supply | Coolant supply according to ASME B5.50 Bores for form AF are sealed with set screws as transport safety |
| Length adjustment screw | With set-screw for axial length adjustment |
Technical data TRIBOS-S CAT40 Ø25x90
| ID: | 0215917 |
|---|---|
| Technology: | Polygonal Toolholder |
| Series: | TRIBOS-S |
| Toolholder interface: | CAT 40 |
| Toolholder standard: | ASME B5.50 |
| Clamping diameter D1: | 25 mm |
| D2 [mm]: | 36 |
| D3 [mm]: | 38.1 |
| D4 [mm]: | 44.45 |
| Projecting length L1 [mm]: | 90 |
| L2 [mm]: | 57 |
| L3 [mm]: | 10 |
| L4 [mm]: | 45 |
| L5 [mm]: | 47.2 |
| L6 [mm]: | 70.95 |
| G: | M10x1 |
| Min. torque [Nm]: | 200 |
#6185595
Brand
Flowdrill
Model
110940
#118549
Brand
Dodge
Model
117104