We never sell your data to third parties
$801.00 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable: Yes
Clamping diameter D1
25 mm
D2 [mm]
60.0
D3 [mm]
63.5
G
M10x1
L2 [mm]
57.0
L3 [mm]
10.0
L4 [mm]
45.0
L5 [mm]
80.9
Min. torque [Nm]
270.0
Projecting length L1 [mm]/[inch]
100 mm / 3.9"
Series
TRIBOS-R
Technology
Polygonal toolholders
Toolholder interface
SK 40
Toolholder standard
DIN ISO 7388-1 AD/AF
Description
TRIBOS-R SK40 Ø25x100, Toolholder- Polygonal Toolholder
- Series: TRIBOS-R
- Toolholder interface: SK 40
- Clamping diameter: 25 mm
- Projecting length: 100 mm
- Run-out accuracy: < 0.003 mm at 2.5 x D
- Balancing grade: G2.5 at 25, 000 RPM or Umax < 1 gmm
- Min. torque: 270 Nm
General notes about the series
| Run-out accuracy | < 0.003 mm at 2.5 x D |
|---|---|
| Balancing grade | G2.5 at 25, 000 RPM or Umax < 1 gmm |
| Tool shank quality | h6 |
| Intermediate sleeves | Additional shank diameters can be clamped using intermediate sleeves |
| Data carrier | Bore for data carrier as an option |
| Toolholder changes | For automatic toolholder changes |
| Coolant supply | Coolant supply according to ISO 7388 AD/AF Bores for form AF are sealed with set screws as transport safety |
| Length adjustment screw | With set-screw for axial length adjustment |
Technical data TRIBOS-R SK40 Ø25x100
| ID: | 0235247 |
|---|---|
| Technology: | Polygonal Toolholder |
| Series: | TRIBOS-R |
| Toolholder interface: | SK 40 |
| Toolholder standard: | DIN ISO 7388-1 AD/AF |
| Clamping diameter D1: | 25 mm |
| D2 [mm]: | 60 |
| D3 [mm]: | 63.5 |
| Projecting length L1 [mm]: | 100 |
| L2 [mm]: | 57 |
| L3 [mm]: | 10 |
| L4 [mm]: | 45 |
| L5 [mm]: | 80.9 |
| G: | M10x1 |
| Min. torque [Nm]: | 270 |
#6106576
Brand
Edwards
Model
AC2200