We never sell your data to third parties
Schunk 1324768 TENDO EC CAT-DC40 ?3/4"x64.5
MODEL 1324768
$671.00 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable: Yes
Clamping diameter D1
3/4"
D2 [mm]
49.0
D6 [mm]
38.0
Dual Contact variant
yes
G
M8x1
L2 [mm]
51.0
L3 [mm]
10.0
L4 [mm]
45.45
Min. torque [Nm]
520.0
Projecting length L1 [mm]/[inch]
64, 5 mm / 2.5"
Series
TENDO E compact
Technology
Hydraulic expansion toolholder
Toolholder interface
CAT-DC 40
Description
TENDO EC CAT-DC40 Ø3/4"x64.5, Toolholder
- Dual contact hydraulic expansion toolholder
- Series: TENDO E compact Dual Contact
- Toolholder interface: CAT-DC 40
- Clamping diameter: 3/4"
- Projecting length: 64.5 mm
- Run-out accuracy: ≤ 0.003 mm at 2.5 x D
- Balancing grade: G2.5 at 25, 000 RPM or Umax < 1 gmm
- Min. torque: 520 Nm
Scope of delivery: Does not include actuation key
General notes about the series
| Version | TENDO E compact (E compact = excellent cost-performance ratio) Short, rigid design |
|---|---|
| Run-out accuracy | ≤ 0.003 mm at 2.5 x D |
| Balancing grade | G2.5 at 25, 000 RPM or Umax < 1 gmm |
| Tool shank quality | h6 |
| Intermediate sleeves | Additional shank diameters can be clamped using intermediate sleeves |
| Data carrier | Bore for data carrier as an option |
| Toolholder changes | For automatic toolholder changes |
| Coolant supply | Coolant supply according to ASME B5.50 Bores for form AF are sealed with set screws as transport safety |
| Flange contact | Similar to ASME B5.50 however with face contact Dual Contact version with simultaneous tapered and flat work surfaces |
| Length adjustment screw | With set-screw for axial length adjustment |
| Scope of delivery | Does not include actuation key |
Technical data TENDO EC CAT-DC40 Ø3/4"x64.5
| ID: | 1324768 |
|---|---|
| Technology: | Dual contact hydraulic expansion toolholder |
| Series: | TENDO E compact Dual Contact |
| Toolholder interface: | CAT-DC 40 |
| Clamping diameter D1: | 3/4" |
| D2 [mm]: | 49 |
| D6 [mm]: | 38 |
| Projecting length L1 [mm]: | 64.5 |
| L2 [mm]: | 51 |
| L3 [mm]: | 10 |
| L4 [mm]: | 45.45 |
| G: | M8x1 |
| Min. torque [Nm]: | 520 |
#6267991
Brand
Drillco
Model
295A108
#2842361
Brand
Irwin Tools
Model
36
#1251759
Brand
Gates Rubber
Model
AX21
#1308105
Brand
WEG
Model
GPH2020PC4001
#6299801
Brand
Te-Co
Model
AWS6010
#6285181
Brand
Sunex Tools
Model
53517