We never sell your data to third parties
$434.00 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable: Yes
Clamping diameter D1
8 mm
D2 [mm]
27.0
D6 [mm]
21.0
G
M6
L2 [mm]
36.0
L3 [mm]
10.0
L4 [mm]
56.0
Min. torque [Nm]
50.0
Projecting length L1 [mm]/[inch]
85 mm / 3.3"
Series
CELSIO
Technology
Heat shrinking toolholder
Toolholder interface
HSK-A 100
Toolholder standard
DIN ISO 12164-1
Description
CELSIO HSK-A100 Ø8x85, Toolholder
- Heat Shrinking Toolholder
- Series: CELSIO
- Toolholder interface: HSK-A 100
- Clamping diameter: 8 mm
- Projecting length: 85 mm
- Run-out accuracy: ≤ 0.003 mm measured in the clamping bore
- Balancing grade: G2.5 at 25, 000 RPM or Umax < 1 gmm
- Min. torque: 50 Nm
General notes about the series
| Run-out accuracy | ≤ 0.003 mm measured in the clamping bore |
|---|---|
| Balancing grade | G2.5 at 25, 000 RPM or Umax < 1 gmm |
| Tool shank quality | h6 |
| Data carrier | Bore holes for data carriers according to DIN 69873 |
| MQL (Minimal Quantity Lubrication) | |
| Toolholder changes | For automatic toolholder changes |
| Length adjustment screw | With set-screw for axial length adjustment |
| Balancing screw | With thread for balancing screws |
| Individual |
Technical data CELSIO HSK-A100 Ø8x85
| ID: | 0208201 |
|---|---|
| Technology: | Heat Shrinking Toolholder |
| Series: | CELSIO |
| Toolholder interface: | HSK-A 100 |
| Toolholder standard: | DIN ISO 12164-1 |
| Clamping diameter D1: | 8 mm |
| D2 [mm]: | 27 |
| D6 [mm]: | 21 |
| Projecting length L1 [mm]: | 85 |
| L2 [mm]: | 36 |
| L3 [mm]: | 10 |
| L4 [mm]: | 56 |
| G: | M6 |
| Min. torque [Nm]: | 50 |
| 2.1 |