We never sell your data to third parties
$500.00 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable: Yes
Clamping diameter D1
8 mm
D2 [mm]
28.0
D6 [mm]
19.5
G1
M8
L2 [mm]
35.0
L4 [mm]
30.5
Projecting length L1 [mm]/[inch]
55 mm / 2.2"
Series
WELDON
Technology
WELDON end mill holders
Toolholder interface
SCHUNK CAPTO C6
Toolholder standard
ISO 26623-1
Description
WEL SCAPTO C6 Ø8x55, Toolholder- WELDON End Mill Holders
- Series: WELDON
- Toolholder interface: SCHUNK CAPTO C6
- Clamping diameter: 8 mm
- Projecting length: 55 mm
- Run-out accuracy: ≤ 0.003 mm measured from taper to D1
- Balancing grade: G2.5 at 25,000 RPM or Umax < 1 gmm
Scope of delivery: Including WELDON clamping screw
General notes about the series
| Version | For clamping tools with cylindrical shanks in accordance with DIN 1835B/6359HB |
|---|---|
| Run-out accuracy | ≤ 0.003 mm measured from taper to D1 |
| Balancing grade | G2.5 at 25,000 RPM or Umax < 1 gmm |
| Thread G1 | G1 = thread for clamping screw |
| Data carrier | Bore holes for data carriers according to DIN 69873 |
| Toolholder changes | For automatic toolholder changes |
| Scope of delivery | Including WELDON clamping screw |
| Individual | Additional sizes and customized designs are available upon request |
Technical data WEL SCAPTO C6 Ø8x55
| ID: | 0243411 |
|---|---|
| Technology: | WELDON End Mill Holders |
| Series: | WELDON |
| Toolholder interface: | SCHUNK CAPTO C6 |
| Toolholder standard: | ISO 26623-1 |
| Clamping diameter D1: | 8 mm |
| D2 [mm]: | 28 |
| D6 [mm]: | 19.5 |
| Projecting length L1 [mm]: | 55 |
| L2 [mm]: | 35 |
| L4 [mm]: | 30.5 |
| G1: | M8 |
| Weight [kg]: | 0.88 |
