We never sell your data to third parties
$228.00 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable: Yes
Clamping diameter D1
25 mm
D2 [mm]
65.0
D6 [mm]
44.5
G1
M18x2
L2 [mm]
60.0
L4 [mm]
84.0
Projecting length L1 [mm]/[inch]
110 mm / 4.3"
Series
WELDON
Technology
WELDON end mill holders
Toolholder interface
HSK-A 63
Toolholder standard
DIN ISO 12164-1
Description
WEL HSK-A63 Ø25x110, Toolholder
- WELDON End Mill Holders
- Series: WELDON
- Toolholder interface: HSK-A 63
- Clamping diameter: 25 mm
- Projecting length: 110 mm
- Run-out accuracy: ≤ 0.003 mm measured from taper to D1
- Balancing grade: G2.5 at 25, 000 RPM or Umax < 1 gmm
Scope of delivery: Including WELDON clamping screw
General notes about the series
| Version | For clamping tools with cylindrical shanks in accordance with DIN 1835B/6359HB |
|---|---|
| Run-out accuracy | ≤ 0.003 mm measured from taper to D1 |
| Balancing grade | G2.5 at 25, 000 RPM or Umax < 1 gmm |
| Thread G1 | G1 = thread for clamping screw |
| Toolholder changes | For automatic toolholder changes |
| Scope of delivery | Including WELDON clamping screw |
| Individual | Additional sizes and customized designs are available upon request |
Technical data WEL HSK-A63 Ø25x110
| ID: | 0263539 |
|---|---|
| Technology: | WELDON End Mill Holders |
| Series: | WELDON |
| Toolholder interface: | HSK-A 63 |
| Toolholder standard: | DIN ISO 12164-1 |
| Clamping diameter D1: | 25 mm |
| D2 [mm]: | 65 |
| D6 [mm]: | 44.5 |
| Projecting length L1 [mm]: | 110 |
| L2 [mm]: | 60 |
| L4 [mm]: | 84 |
| G1: | M18x2 |
#1750338
Brand
NEBO
Model
6006
#6108784
Brand
Greenfield Threading
Model
366110
#172260
Brand
Gates Rubber
Model
2322V481
#6299667
Brand
Te-Co
Model
AK59124