Schunk 1463185 KSH3-LH 140-Z Standard Hydraulic Clamping Force Block

- 2-jaw clamping force block
- Centric clamping
- Long stroke
- Jig-manufactured positioning bores
- Base jaws: Fine serration or tongue and groove

Technical data:
- Dimensions: 140 x 140 x 77.7 mm
- Clamping force at max. operating pressure: 30 kN
- Stroke per jaw: 7 mm
- Max. jaw height: 60 mm
- Repeat accuracy: 0.01 mm
- Operating pressure: 10 - 120 bar
- Oil consumption per double stroke: 70 cm3
- Max. volume flow: 2 l/min
- Closing / Opening time: 1 s
- Weight: 9.1 kg
Scope of delivery:
1x Clamping force block KSH3-LH 140-Z
4x Mounting screws for clamping force block
8x Mounting screws for top jaws
4x Plugs with O-rings
2x Clamping sleeves
2x Fitting screws
10x O-rings for the sealing of the bottom-sided supplies
1x Operating manual
Not in scope of delivery:
- System and top jaws
Hint:
- Technical data sheet and installation drawing
 available on request.
- Jig-manufactured positioning bores stand for the
 positioning of the clamping force block via centering
 pins (± 0.01 mm) to the clamping center.
- Height tolerance: ±0.04 mm
 Clamping force blocks grinded on same height on request.
- The repeat accuracy is The result from The end position
 spreads after 100 consecutive
 strokes.
- For the maintenance of the TANDEM vises it is
 mandatory to use the special grease LP 410
 (ID 0184213).