We never sell your data to third parties
JET 311500 3SS-1C-15 3 Ton 1Ph 15' Lift 115/230V Prewired 230V
MODEL 311500
Contact supplier for technical support on: 833 383 6800
$6,036.73 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable: Yes
Capacity (Lbs.)
6600
Duty Cycle (%)
25
Duty Cycle Rating
H3
Height
17.6 in
Length
22.5 in
Lift (Ft.)
15
Lifting Speed (FPM)
6.6
Load Capacity (Tons)
3
Load Chain Dimensions dia/mm)
8 X 24
Max. Number of Starts (Per Hr.)
150
Max. On Time (Min. / Hr.)
15
Motor (HP)
1-3/4 HP, 230V, 1 Ph
Motor Phase
1
Overload Protection
Yes
Weight (Lbs.)
214
Width
21.8 in
JET Electric Chain Hoist, 1-Phase, Series: SSC, 3 ton, 15 ft Lifting Height, 6 fpm Lift Speed, 24 VAC Pushbutton Station Control, DC Electromagnetic Brake, 1-3/4 hp, 115/230 VAC, 20.8/10 A, 31-1/2 in Headroom, 214 lb
Features
- Overload protection slip clutch design prevents the hoist from lifting damaging loads above its rated capacity
- Thermal overload protection protects the hoist from overheating in low voltage situations
- DC electro-magnetic brake an industry proven safety feature that secures the load even if power is interrupted to the hoist
- Limit switches - upper and lower limiting switches increase safety by preventing the load chain from over traveling
- Safety and durability, prewired 230 V
- Sealed gear train maintenance free gear train incorporates a sealed oil bath that eliminates upkeep
- Grade 80 black oxide coated load chain for durability
- Control pendant- 24 volt push button controller with cable strain relief system for durability and reliability in industrial and commercial settings
- 3 falls
- H3 duty rating
- 25% duty cycle
- Certification load tested to 125% of capacity with certificate
- Controls- NEMA 4X compliant push button control pendants
- Fully enclosed, all steel plate construction with a durable powder coat finish keeps out moisture, dust and debris lengthening the life of the hoist
- NEMA 4X compliant
- 8 x 24 mm load chain
Standards: ANSI/ASME B30.16|HST-1 Standards|OSHA Regulations
Application: Commercial and Industrial Applications, Material Handling and Overhead Lifting
Rating of purchase of jet drum sander
Verified · SKU 6106466First, the bad part. It took months to get this machine. As the estimated shipment date drew near, it was pushed be a week. Disappointment! However, I understand the supply chain issues under the current administration and do not fault the company. From the date of shipment notification, the lapse time was approximately 3 days. It arrived in a crate and was well packed within. On the fourth day it was assembled and put into use. This drum sander functions great. It is a replacement for a Delta drum sander I had prrchased 20 years ago. It was destroyed by movers when we moved to TX. Originally, I purchased another Delta sander, however, when it arrived I discovered that it basically had no warranty It went back. This sander is well made and I expect will last another 20 years. Whenever I contacted MRO with a question, they were courteous and prompt in providing me with the answer. I would definitely consider future purchases with them. Read more
#6280692
Brand
M.K. Morse
Model
HHB1218T100
#6084468
Brand
Dormer Pramet
Model
5988886
#6086696
Brand
Precision Twist Drill
Model
6001280
#6087024
Brand
Precision Twist Drill
Model
76HAN4