Bell & Gossett 1BL068LF PL-55B lead free bronze booster pump delivers 2/5 HP at 3250 RPM with 115V single phase power. This Series PL pump provides a flow range of 0-50 GPM, maximum pressure of 150 PSI, and maximum temperature of 225°F. Suitable for potable water and hydronic applications.

Series PL bronze body pumps are dependable, in-line wet rotor circulator pumps specifically intended to pump potable, domestic water from hot water heater tanks to areas such as bathrooms and kitchens. The Series PL features a maintenance-free system, with a self-cleaning particle shield protects the shaft and bearings from system start-up debris. The unique XL11 precision-crafted bearing system also contributes to trouble-free start-ups. A powerful, dry-motor design offers 25% more efficiency than the competition. Unlike a wet rotor, the Series PL does not need to bypass system water through the motor to lubricate and cool the bearings. The PL's advanced close-coupled design increases pump life and efficiency. The Series PL's stabilized heat-resistant, non-metallic impeller with a closed design improves overall operating efficiency. Unlike larger wet rotor circulators of similar performance, the Series PL is able to handle difficult water conditions at a wide range of temperatures. Mounting hardware and flange gaskets are included with the pump. Flanges are available separately in 3/4", 1", 1-1/4", and 1-1/2".

HP 2/5

Volts 115

Phase 1

RPM 3250

Amps 4.7

Max. Operating Pressure 150 psi

Max. Temp. 225 Degrees F

Face to Face Dimensions 6-3/8"

GPM @ Head @ 46 gpm @ 5 ft.

GPM @ Head @ 44 gpm @ 10 ft.

GPM @ Head @ 40 gpm @ 15 ft.

GPM @ Head @ 35 gpm @ 20 ft.

GPM @ Head @ 32 gpm @ 25 ft.

GPM @ Head @ 26 gpm @ 30 ft.

GPM @ Head @ 22 gpm @ 35 ft.

GPM @ Head @ 16 gpm @ 40 ft.

Permanently oil-lubricated and maintenance free

Operates in systems up to 150 PSI with temperatures up to 225°F

Precision-machined and balanced alloy steel rotor

Carbon/silicon carbide seal system