We never sell your data to third parties
Grundfos 96083215 CR 3-10 A-FGJ-A-E-HQQE vertical multistage centrifugal pump delivers 2 HP at 3450 rpm with a rated flow of 15.4 GPM and maximum head of 95.3 m. This 10-stage unit features a cast iron base, stainless steel impellers, and a single HQQE carbon/silicon carbide mechanical seal with EPDM elastomer. It operates on 115/208-230V single-phase power and includes a TEFC Baldor motor with 56C flange. The pump is NSF/ANSI 61 certified for drinking water and CURUS approved.
MODEL 96083215
$3,082.00 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable:No
Approvals
CURUS
Approvals for drinking water
NSF61
Base
Cast iron
Bearing
SIC
Code for rubber
E
Code for shaft seal
HQQE
Connect code
FGJ
Cooling
TEFC
Curve tolerance
2012 3B
Density
998.2 kg/m³
Density (lb/ftBi)
62.29
Flange rating inlet
250 lb
Flange size
56C
Flange size for motor
56C
Full load SF current
25.4/12.7 A
HP
2
Impeller
Stainless steel
Impellers
10
Insulation class (IEC 85)
F
Liquid temperature range (°C)
-20 - 120
Low NPSH
N
Mains frequency
60 Hz
Material code
A
Max ambient temperature (F)
104
Max pressure (psi)
363
Max pressure at stated temp (°C)
25 bar / 120
Maximum ambient temperature (°C)
40
Maximum head
95.3 m
Maximum operating pressure (bar)
25
Model
A
Motor efficiency at full load
74 %
Motor no
84Z04010
Motor standard
NEMA
Motor type
BALDOR
Number of poles
2
Number of reduced-diameter impellers
0
Pipe connection
1 1/4 in
Power (P2) required by pump
1.5 kW
Pressure rating for connection
PN 25
Product name
CR 3-10 A-FGJ-A-E-HQQE
Product no
96083215
Pump orientation
Vertical
Pump speed on which pump data are based
3450 rpm
Pump version
A
Pumped liquid
Water
Rate flow (gpm)
15.4
Rated current
23,0/12,7-11,5 A
Rated flow
3.5 m³/h
Rated head
70.3 m
Rated power - P2
1.5 kW
Rated speed
3450 rpm
Rated voltage
1 x 115/208-230 V
Selected liquid temperature (°C)
20
Service factor
1.15
Shaft seal arrangement
Single
Size of inlet connection
DN 25/32
Size of outlet connection
DN 25/32
Stages
10
Temperature (°C)
25 bar / -20
Temperature range (F)
-4 - 248
Type of connection
DIN / ANSI / JIS
Vertical, multistage centrifugal pump with suction and discharge ports on the same level. The pump head and base are in cast iron - all other wetted parts are in stainless steel (EN 1.4301)
| Brand | Red Lion Controls |
| Model | ZOH0200A |
| Brand | Hubbell Wiring |
| Model | HBL7765C |
| Brand | Martin Sprocket |
| Model | 50SDS40 |
| Brand | Red Lion Controls |
| Model | MP37TAC1 |
