We never sell your data to third parties
Image for Illustration purposes only. Actual product may vary
Grundfos 96082595 CRI 1-7 A-FGJ-A-V-HQQV vertical multistage centrifugal pump with 0.75 HP, 1-phase 115/208-230V motor, 7 stages, and TEFC enclosure. Features a stainless steel base and impeller, carbon/silicon carbide mechanical seal with FKM elastomer (HQQV), and 1-1/4 inch FGJ pipe connection. Rated flow of 9.69 GPM at 45.1 m head, maximum head 60.9 m, and maximum pressure 363 psi. Suitable for water and light chemical applications.
MODEL 96082595
$1,688.38 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable: Yes
Approvals
CURUS
Base
Stainless steel
Bearing
SIC
Code for rubber
V
Code for shaft seal
HQQV
Connect code
FGJ
Cooling
TEFC
Curve tolerance
2012 3B
Density
998.2 kg/m³
Density (lb/ftBi)
62.29
Enclosure class (IEC 34-5)
IP54
Flange rating inlet
300 lb
Flange size
56C
Flange size for motor
56C
Full load SF current
11.4/6.0 - 5.7 A
HP
0.75
Impeller
Stainless steel
Impellers
7
Insulation class (IEC 85)
B
Liquid temperature range (°C)
-20 - 90
Low NPSH
N
Mains frequency
60 Hz
Material code
A
Max ambient temperature (F)
104
Max pressure (psi)
363
Max pressure at stated temp (°C)
25 bar / 90
Maximum ambient temperature (°C)
40
Maximum head
60.9 m
Maximum operating pressure (bar)
25
Model
A
Motor efficiency at full load
66.0 %
Motor no
84Z04001
Motor standard
NEMA
Motor type
BALDOR
Number of poles
2
Number of reduced-diameter impellers
0
Pipe connection
1 1/4 in
Power (P2) required by pump
0.55 kW
Pressure rating for connection
PN 25
Product name
CRI 1-7 A-FGJ-A-V-HQQV
Product no
96082595
Pump orientation
Vertical
Pump speed on which pump data are based
3464 RPM
Pump version
A
Pumped liquid
Water
Rate flow (gpm)
9.69
Rated current
9,60/5,00-4,80 A
Rated flow
2.2 m³/h
Rated head
45.1 m
Rated power - P2
0.55 kW
Rated speed
3450 rpm
Rated voltage
1 x 115/208-230 V
Selected liquid temperature (°C)
20
Service factor
1.25
Shaft seal arrangement
Single
Size of inlet connection
DN 25/32
Size of outlet connection
DN 25/32
Stages
7
Temperature (°C)
25 bar / -20
Temperature range (F)
-4 - 194
Type of connection
DIN / ANSI / JIS
Vertical, multistage centrifugal pump with suction and discharge ports on same the level. Pump materials in contact with the liquid are in stainless steel (EN 1.4301)
