We never sell your data to third parties
Grundfos 96465606 MS 402 mechanical seal kit for 0.50 HP 230V single-phase 4-inch submersible pump motors. Includes lip seal shaft seal for MS402 T40 motor version. Compatible with 3-wire CSIR start motors with 65 µF/220V start capacitor. For use in 3450 RPM submersible well pump applications.
MODEL 96465606
$434.49 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable: Yes
Approvals
CE,EAC,CSACOMP,UR
Axial load max
350 kg
Breakdown torque
200 %
Built-in motor protection
CONTACT
Built-in temp transmitter
No
Capacitor size - start
65 µF/220 V
Cos phi - power factor
0.76
Enclosure class (IEC 34-5)
IP68
Insulation class (IEC 85)
B
KVA code
L
Locked-rotor torque
170 %
Mains frequency
60 Hz
Maximum ambient pressure (bar)
15
Maximum current consumption
6 A
Model
B
Moment of inertia
0.0005 kg m²
Motor
Stainless steel
Motor diameter
4 in
Motor type
MS402
Motor type 1-phase
CSIR
Motor version
T40
Product name
MS 402
Product no
96465606
R a
4.25 ohm
R s1
17.6 ohm
Rated current
6 A
Rated full-load torque
1.65 Nm
Rated power - P2
0.37 kW
Rated speed
3450 rpm
Rated voltage
1 x 230 V
Service factor
1.60
Shaft seal for motor
LIPSEAL
Start method
direct-on-line
Starting current
410 %
Staybolt
5/16-24 UNF
Thermal protec
internal
Voltage tolerance
+10/-10 %
Windings
Enamelled
Grundfos Grundfos 96465606
UPC: | UNSPSC: 26101107 | GTIN:
Electric Motors > AC Motors
Grundfos Submersible Motor, 3-Wire, 1/2 hp, 230 VAC, 60 Hz, 1 ph, Service Factor: 1.6, Thrust Bearing, Insulation Class: Class B, 304 Stainless Steel, 4 in Dia
Features:
- Over temperature protection via power cable by means of a built-in tempcon temperature transmitter
- Standardized NEMA flange and shaft end
- Mechanical shaft seal, ceramic/carbon or Sic/Sic
- Completely encapsulated in stainless steel
- All surfaces in contact with the liquid are made of stainless steel
- Liquid-cooled and has liquid-lubricated bearings
- MS 402: Designed for the domestic ground water market and covers outputs up to 2.2 kW (3 hp)
- Michell-type thrust bearings with high thrust capacity
- Quickly builds up a water film during start-up to ensure high thrust capacity
- Can be fitted on all Grundfos SP-A, SP pumps and can be used in the type BM and BMB high pressure booster modules
Specs:
- Service Factor: 1.6
- Insulation Class: Class B
- Phase: 1 ph
- Horsepower: 1/2 hp
- Bearing Type: Thrust
- Frequency Rating: 60 Hz
- Voltage Rating: 230 VAC
- Dimensions: 4 in Dia
- Material: 304 Stainless Steel
- Type: 3-Wire
Certifications/Standards:
CE Certified | EN 1.4301
SKU: 5026852
Great customer experience
The product was exactly as expected, but the level of customer service is what sets MRO apart. There was a delay with the shipping and they kept me informed every step of the way and provided options if the delay would not work for my situation. Great job!
Read moreSKU: 6099694
Awesome company
They are super helpful and we’re the only company that had the pump that I needed to my water in my house running again!
Read more
| Brand | MROSupply Fasteners |
| Model | FSTPCK-488147 |
| Brand | MROSupply Fasteners |
| Model | FSTPCK-537160 |
SKU: 5026852
Great customer experience
The product was exactly as expected, but the level of customer service is what sets MRO apart. There was a delay with the shipping and they kept me informed every step of the way and provided options if the delay would not work for my situation. Great job!
Read moreSKU: 6099694
Awesome company
They are super helpful and we’re the only company that had the pump that I needed to my water in my house running again!
Read more