We never sell your data to third parties
SKF / CR Seals (formerly CR Seals) 8634 is a small bore radial shaft oil seal designed for light-duty applications. This seal features a nitrile rubber (NBR) sealing lip with spring loading for reliable radial contact. Operating temperature range: -40°F to 250°F. Suitable for use in electric motors, gearboxes, pumps, and other rotating equipment. Prevents lubricant leakage and contaminant ingress.
MODEL 8634
Contact supplier for technical support on: 267-436-6000
$29.22 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 3 days
Returnable:No
Auxiliary lip
Yes
Design
CRWA5
Housing bore diameter
31.75 mm, 1.25 in
Maximum operating temperature
200.0 °C, 392.0 °F
Maximum operating temperature (°F)
200.0 °C, 392.0
Minimum operating temperature
-40.0 °C, -40.0 °F
Minimum operating temperature (°F)
-40.0 °C, -40.0
Permissible circumferential speed
4.55 m/s
Rotational speed
3910.0 r/min
Seal width
6.35 mm, 0.25 in
Sealing lip material
Fluoro rubber (FKM)
Shaft diameter
22.23 mm, 0.875 in
Type of outside diameter
Metal-cased with sealant coating on the outside diameter
Unit system
Inch
Radial shaft seal with metal case, SKF Wave lip and auxiliary, contacting lip, for oil or grease
Radial shaft seals are used between rotating and stationary machine components, or between components in relative motion. CRWA5 seals are designed with a metal case, an SKF WAVE lip made of elastomer with higher pumping rate to reduce heat generation. The seal also has a garter spring and a non-contacting auxiliary lip optimizes the sealing against the shaft.
- For oil or grease
- With garter spring
- WAVE lip creates higher pumping rate
- WAVE lip has less friction between shaft and lip
- WAVE lip has a lower temperature at the contact point
SKU: 1898441
Mro supply - seals
I use a lot of the SKF6119 seals for chainsaw repairs and MRO always has the best prices and fast shipping.
Read moreSKU: 300488
Works good great delivery time
The seals works as they should. Delivery time was good
Read moreSKU: 301341
Great first impression
The site was easy to navigate. I placed the order and I was kept up to date with it’s processing and shipping progress. I would definitely use them again
Read more
| Brand | Chicago-Latrobe |
| Model | 68928 |
| Brand | Rollway |
| Model | 33208 |
| Brand | Chicago-Latrobe |
| Model | 48564 |
| Brand | Gates Rubber |
| Model | 14ADV-3136-125 |
| Brand | MROSupply Fasteners |
| Model | FSTPCK-771522 |
| Brand | Chicago-Latrobe |
| Model | 78488 |
| Brand | MROSupply Fasteners |
| Model | FSTPCK-774174 |
SKU: 1898441
Mro supply - seals
I use a lot of the SKF6119 seals for chainsaw repairs and MRO always has the best prices and fast shipping.
Read moreSKU: 300488
Works good great delivery time
The seals works as they should. Delivery time was good
Read moreSKU: 301341
Great first impression
The site was easy to navigate. I placed the order and I was kept up to date with it’s processing and shipping progress. I would definitely use them again
Read moreDisclaimer: The return policy information shown below is merely an excerpt from SKF's General Conditions of Sale.
RETURN OF GOODS FOR CREDIT
Goods will not be accepted for return without prior written approval from SKF. The return freight must be prepaid by the Buyer. Unless return of Goods is due to Supplier error, Goods returned will be subject to a credit service fee of $25.00 or 15% of the credit value, whichever is greater. An additional service fee may apply is further inspection is required at the discretion of SKF