We never sell your data to third parties
SKF / CR Seals 42X62X8 CRW1 R CRW1 Single Lip radial shaft oil seal for 42mm shaft diameter, 62mm housing bore, and 8mm seal width. Features an NBR sealing lip with spring-loaded garter spring for consistent radial sealing force. Operating temperature range: -40°F to 250°F (-40°C to 121°C). Suitable for electric motors, gearboxes, pumps, and other rotating equipment.
MODEL 42X62X8 CRW1 R
Contact supplier for technical support on: 267-436-6000
$11.91 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 3 days
Returnable:No
Auxiliary lip
No
Design
CRW1
Housing bore diameter
62.0 mm, 2.441 in
Maximum operating temperature
100.0 °C, 212.0 °F
Maximum operating temperature (°F)
100.0 °C, 212.0
Minimum operating temperature
-40.0 °C, -40.0 °F
Minimum operating temperature (°F)
-40.0 °C, -40.0
Permissible circumferential speed
7.0 m/s
Rotational speed
3240.0 r/min
Seal width
8.0 mm, 0.315 in
Sealing lip material
Nitrile rubber (NBR)
Shaft diameter
42.0 mm, 1.654 in
Type of outside diameter
Metal-cased with sealant coating on the outside diameter
Unit system
Metric
Radial shaft seal with metal case and SKF Wave lip, for oil or grease
Radial shaft seals are used between rotating and stationary machine components, or between components in relative motion. CRW1 seals are designed with a metal case, an SKF WAVE lip made of elastomer with higher pumping rate to reduce heat generation, and a garter spring to optimize sealing against the shaft. Most of the seals feature the SKF Bore Tite coating on the outside diameter that helps fill small imperfections in the housing bore.
- For oil or grease
- With garter spring
- WAVE lip creates higher pumping rate
- WAVE lip has less friction between shaft and lip
- WAVE lip has a lower temperature at the contact point
SKU: 300488
Works good great delivery time
The seals works as they should. Delivery time was good
Read moreSKU: 301341
Great first impression
The site was easy to navigate. I placed the order and I was kept up to date with it’s processing and shipping progress. I would definitely use them again
Read moreSKU: 1898386
Small diameter seals
I use a lot of small diameter inch dimension seals for the repair of older chainsaws. MRO is a great resource for many seals with very competitive prices and free shipping for larger orders. I will continue to use MRO whenever I can.
Read more
#1465567
Brand
Dichtomatik
Model
75015312
| Brand | Krylon |
| Model | R01041 |
| Brand | McGill Bearing |
| Model | MCYRR 15 S |
| Brand | Bestt Liebco |
| Model | 99081630 |
| Brand | KOP-FLEX |
| Model | 1060 HUBX 1 3/8 |
| Brand | Superlok |
| Model | SMEI-8-8N |
| Brand | CoxReels |
| Model | TSH-N-550-DF-BBX |
| Brand | Superlok |
| Model | SPMEI-4-4G |
SKU: 300488
Works good great delivery time
The seals works as they should. Delivery time was good
Read moreSKU: 301341
Great first impression
The site was easy to navigate. I placed the order and I was kept up to date with it’s processing and shipping progress. I would definitely use them again
Read moreSKU: 1898386
Small diameter seals
I use a lot of small diameter inch dimension seals for the repair of older chainsaws. MRO is a great resource for many seals with very competitive prices and free shipping for larger orders. I will continue to use MRO whenever I can.
Read moreDisclaimer: The return policy information shown below is merely an excerpt from SKF's General Conditions of Sale.
RETURN OF GOODS FOR CREDIT
Goods will not be accepted for return without prior written approval from SKF. The return freight must be prepaid by the Buyer. Unless return of Goods is due to Supplier error, Goods returned will be subject to a credit service fee of $25.00 or 15% of the credit value, whichever is greater. An additional service fee may apply is further inspection is required at the discretion of SKF