We never sell your data to third parties
SKF / CR Seals 38590 small bore radial shaft oil seal for compact rotating equipment. Spring-loaded sealing lip provides consistent radial force to prevent lubricant leakage and contaminant ingress. Suitable for electric motors, gearboxes, pumps, and industrial machinery.
MODEL 38590
Contact supplier for technical support on: 267-436-6000
$49.32 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 3 days
Returnable:No
Auxiliary lip
No
Design
X12
Housing bore diameter
136.91 mm, 5.39 in
Maximum operating temperature
100.0 °C, 212.0 °F
Maximum operating temperature (°F)
100.0 °C, 212.0
Minimum operating temperature
-40.0 °C, -40.0 °F
Minimum operating temperature (°F)
-40.0 °C, -40.0
Permissible circumferential speed
2.54 m/s
Rotational speed
493.0 r/min
Seal width
9.53 mm, 0.375 in
Sealing lip material
Nitrile rubber (NBR)
Shaft diameter
98.43 mm, 3.875 in
Type of outside diameter
Metal-cased
Unit system
Inch
Radial shaft seal with double metal case and four sealing lips, for grease
Radial shaft seals are used between rotating and stationary machine components, or between components in relative motion. X12 seals are designed with a single metal case. They have four conventional sealing lips made of nitrile rubber, which optimizes the sealing against the bore. Typical applications include grease lubricated agriculture machinery.
- Maximise the exclusion of contamination
- Accommodate low speed
- Easy installation
SKU: 1898386
Small diameter seals
I use a lot of small diameter inch dimension seals for the repair of older chainsaws. MRO is a great resource for many seals with very competitive prices and free shipping for larger orders. I will continue to use MRO whenever I can.
Read moreSKU: 300488
Works good great delivery time
The seals works as they should. Delivery time was good
Read more
| Brand | Hyde Tools |
| Model | 42056 |
| Brand | Wiegmann |
| Model | S121260GNK |
| Brand | MRO Supply |
| Model | 3G143 |
SKU: 1898386
Small diameter seals
I use a lot of small diameter inch dimension seals for the repair of older chainsaws. MRO is a great resource for many seals with very competitive prices and free shipping for larger orders. I will continue to use MRO whenever I can.
Read moreSKU: 300488
Works good great delivery time
The seals works as they should. Delivery time was good
Read moreDisclaimer: The return policy information shown below is merely an excerpt from SKF's General Conditions of Sale.
RETURN OF GOODS FOR CREDIT
Goods will not be accepted for return without prior written approval from SKF. The return freight must be prepaid by the Buyer. Unless return of Goods is due to Supplier error, Goods returned will be subject to a credit service fee of $25.00 or 15% of the credit value, whichever is greater. An additional service fee may apply is further inspection is required at the discretion of SKF