We never sell your data to third parties
SKF / CR Seals (formerly CR Seals) 110X160X12 CRWH1 R is a CRWH1 Single Lip with Auxiliary Lip radial shaft oil seal for 110mm shaft diameter, 160mm housing bore, and 12mm seal width. The auxiliary dust exclusion lip provides enhanced protection against external contaminants. Constructed with an NBR sealing lip and spring-loaded garter spring for consistent radial sealing force. Operating temperature range: -40°F to 250°F (-40°C to 121°C).
MODEL 110X160X12 CRWH1 R
Contact supplier for technical support on: 267-436-6000
$50.51 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 3 days
Returnable:No
Auxiliary lip
No
Design
CRWH1
Housing bore diameter
160.0 mm, 6.299 in
Maximum operating temperature
100.0 °C, 212.0 °F
Maximum operating temperature (°F)
100.0 °C, 212.0
Minimum operating temperature
-40.0 °C, -40.0 °F
Minimum operating temperature (°F)
-40.0 °C, -40.0
Permissible circumferential speed
11.0 m/s
Rotational speed
1920.0 r/min
Seal width
12.0 mm, 0.472 in
Sealing lip material
Nitrile rubber (NBR)
Shaft diameter
110.0 mm, 4.331 in
Type of outside diameter
Metal-cased with sealant coating on the outside diameter
Unit system
Metric
Radial shaft seal with double metal case, SKF Wave lip, for oil or grease
Radial shaft seals are used between rotating and stationary machine components, or between components in relative motion. CRWH1 seals are designed with a double metal case, an SKF WAVE lip made of elastomer with a higher pumping rate to reduce heat generation, and a garter spring to optimize sealing against the shaft. Most of the seals feature the SKF Bore Tite coating on the outside diameter that helps fill small imperfections in the housing bore.
- For oil or grease
- With garter spring
- WAVE lip creates higher pumping rate
- WAVE lip has less friction between shaft and lip
- WAVE lip has a lower temperature at the contact point
SKU: 300488
Works good great delivery time
The seals works as they should. Delivery time was good
Read moreSKU: 301341
Great first impression
The site was easy to navigate. I placed the order and I was kept up to date with it’s processing and shipping progress. I would definitely use them again
Read moreSKU: 1907550
Great service and product!
Doing boat repairs is trying at best when you are on the hard. While the clock tics by , the dollars add up. Being able to find, order and receive part in a timely fashoin is a tall order and MRO Supply was able to meet all of our needs! Great job MRO! We'll be back!
Read more
| Brand | Boston Gear |
| Model | ORC5SMCHP44P40 |
| Brand | NK North America Inc. |
| Model | K0796.3000827 |
| Brand | NK North America Inc. |
| Model | K0154.4086X60 |
| Brand | NK North America Inc. |
| Model | K0262.13087 |
SKU: 300488
Works good great delivery time
The seals works as they should. Delivery time was good
Read moreSKU: 301341
Great first impression
The site was easy to navigate. I placed the order and I was kept up to date with it’s processing and shipping progress. I would definitely use them again
Read moreSKU: 1907550
Great service and product!
Doing boat repairs is trying at best when you are on the hard. While the clock tics by , the dollars add up. Being able to find, order and receive part in a timely fashoin is a tall order and MRO Supply was able to meet all of our needs! Great job MRO! We'll be back!
Read moreDisclaimer: The return policy information shown below is merely an excerpt from SKF's General Conditions of Sale.
RETURN OF GOODS FOR CREDIT
Goods will not be accepted for return without prior written approval from SKF. The return freight must be prepaid by the Buyer. Unless return of Goods is due to Supplier error, Goods returned will be subject to a credit service fee of $25.00 or 15% of the credit value, whichever is greater. An additional service fee may apply is further inspection is required at the discretion of SKF