We never sell your data to third parties
Image for Illustration purposes only. Actual product may vary
$95.05 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 3 days
Returnable:No
Auxiliary lip
No
Design
CRWH1
Housing bore diameter
190.5 mm, 7.5 in
Maximum operating temperature
100.0 °C, 212.0 °F
Maximum operating temperature (°F)
100.0 °C, 212.0
Minimum operating temperature
-40.0 °C, -40.0 °F
Minimum operating temperature (°F)
-40.0 °C, -40.0
Permissible circumferential speed
12.0 m/s
Rotational speed
1440.0 r/min
Seal width
12.7 mm, 0.5 in
Sealing lip material
Nitrile rubber (NBR)
Shaft diameter
158.75 mm, 6.25 in
Type of outside diameter
Metal-cased
Unit system
Inch
Radial shaft seal with double metal case, SKF Wave lip, for oil or grease
Radial shaft seals are used between rotating and stationary machine components, or between components in relative motion. CRWH1 seals are designed with a double metal case, an SKF WAVE lip made of elastomer with a higher pumping rate to reduce heat generation, and a garter spring to optimize sealing against the shaft. Most of the seals feature the SKF Bore Tite coating on the outside diameter that helps fill small imperfections in the housing bore.
- For oil or grease
- With garter spring
- WAVE lip creates higher pumping rate
- WAVE lip has less friction between shaft and lip
- WAVE lip has a lower temperature at the contact point
SKU: 301341
Great first impression
The site was easy to navigate. I placed the order and I was kept up to date with it’s processing and shipping progress. I would definitely use them again
Read moreSKU: 1898441
Mro supply - seals
I use a lot of the SKF6119 seals for chainsaw repairs and MRO always has the best prices and fast shipping.
Read moreSKU: 300488
Works good great delivery time
The seals works as they should. Delivery time was good
Read more
| Brand | SKF Seals |
| Model | 18545 |
| Brand | SKF Seals |
| Model | 525633 |
| Brand | SKF Seals |
| Model | 49966 |
| Brand | SKF Seals |
| Model | 35076 |
| Brand | Falk |
| Model | 6761077 |
SKU: 301341
Great first impression
The site was easy to navigate. I placed the order and I was kept up to date with it’s processing and shipping progress. I would definitely use them again
Read moreSKU: 1898441
Mro supply - seals
I use a lot of the SKF6119 seals for chainsaw repairs and MRO always has the best prices and fast shipping.
Read moreSKU: 300488
Works good great delivery time
The seals works as they should. Delivery time was good
Read moreDisclaimer: The return policy information shown below is merely an excerpt from SKF's General Conditions of Sale.
RETURN OF GOODS FOR CREDIT
Goods will not be accepted for return without prior written approval from SKF. The return freight must be prepaid by the Buyer. Unless return of Goods is due to Supplier error, Goods returned will be subject to a credit service fee of $25.00 or 15% of the credit value, whichever is greater. An additional service fee may apply is further inspection is required at the discretion of SKF