We never sell your data to third parties
SKF / CR Seals 400380 VR1 V-Ring axial face seal for rotating shafts. Flexible elastomer lip mounts directly on the shaft, preventing lubricant leakage and excluding contaminants. Suitable for electric motors, gearboxes, pumps, and other rotating equipment where axial space is limited.
MODEL 400380
Contact supplier for technical support on: 267-436-6000
$3.56 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 3 days
Returnable:No
Design
VR1
Max shaft diameter
38.0 mm, 1.496 in
Min shaft diameter
36.0 mm, 1.417 in
Seal width
7.5 mm, 0.295 in
Sealing lip material
Nitrile rubber (NBR)
Shaft diameter, maximum
38.0 mm, 1.496 in
Shaft diameter, minimum
36.0 mm, 1.417 in
V-ring seal, VR1 design, North American standard, interchangeable with VA design
V-ring seals (V-rings) are all-rubber, axial shaft seals. They offer an easy-to-install solution for rotating shaft applications, including use as a secondary seal in highly contaminated environments. The VR1 design includes a standard cross section with a straight back side face. Being the most common type of V-rings, VR1 seals are typically used to protect bearing arrangements in gearboxes, electric motors and drives.
- Easy to install
- Cost-effective
- Reliable contamination exclusion
- If not in stock alternatives can be produced by SKF SEAL JET systems
SKU: 1907550
Great service and product!
Doing boat repairs is trying at best when you are on the hard. While the clock tics by , the dollars add up. Being able to find, order and receive part in a timely fashoin is a tall order and MRO Supply was able to meet all of our needs! Great job MRO! We'll be back!
Read moreSKU: 301341
Great first impression
The site was easy to navigate. I placed the order and I was kept up to date with it’s processing and shipping progress. I would definitely use them again
Read moreSKU: 300488
Works good great delivery time
The seals works as they should. Delivery time was good
Read more
| Brand | DURUS |
| Model | DRS 22X30X8 C |
| Brand | Flowtrend |
| Model | M38HP808235 |
| Brand | DURUS |
| Model | DRS 40X62X10 C |
| Brand | DURUS |
| Model | DRS 20X31X7 C |
| Brand | DURUS |
| Model | DRS 35X54X8 C |
| Brand | Cutler Hammer |
| Model | E57LBL18T111 |
| Brand | DURUS |
| Model | DRS 80X95X10 C |
| Brand | DURUS |
| Model | DRS 450553 SC |
SKU: 1907550
Great service and product!
Doing boat repairs is trying at best when you are on the hard. While the clock tics by , the dollars add up. Being able to find, order and receive part in a timely fashoin is a tall order and MRO Supply was able to meet all of our needs! Great job MRO! We'll be back!
Read moreSKU: 301341
Great first impression
The site was easy to navigate. I placed the order and I was kept up to date with it’s processing and shipping progress. I would definitely use them again
Read moreSKU: 300488
Works good great delivery time
The seals works as they should. Delivery time was good
Read moreDisclaimer: The return policy information shown below is merely an excerpt from SKF's General Conditions of Sale.
RETURN OF GOODS FOR CREDIT
Goods will not be accepted for return without prior written approval from SKF. The return freight must be prepaid by the Buyer. Unless return of Goods is due to Supplier error, Goods returned will be subject to a credit service fee of $25.00 or 15% of the credit value, whichever is greater. An additional service fee may apply is further inspection is required at the discretion of SKF