We never sell your data to third parties
SKF / CR Seals 400381 VR1 V-Ring axial face seal for rotating shafts. The VR1 V-Ring provides reliable sealing against contaminants and lubricant leakage in electric motors, gearboxes, and pumps. Constructed with a flexible elastomer lip that mounts directly on the shaft, it accommodates axial and radial misalignment. Operating temperature range varies by material.
MODEL 400381
Contact supplier for technical support on: 267-436-6000
$3.96 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 3 days
Returnable:No
Design
VR2
Max shaft diameter
38.0 mm, 1.496 in
Min shaft diameter
36.0 mm, 1.417 in
Seal width
10.5 mm, 0.413 in
Sealing lip material
Nitrile rubber (NBR)
Shaft diameter, maximum
38.0 mm, 1.496 in
Shaft diameter, minimum
36.0 mm, 1.417 in
V-ring seal, VR2 design, North American standard, interchangeable with VS design
V-ring seals (V-rings) are all-rubber, axial shaft seals. They offer an easy-to-install solution for rotating shaft applications, including use as a secondary seal in highly contaminated environments. The VR2 design includes a standard low cross section with a tapered back side face and a wide seal body, providing a firm hold on the shaft. VR2 seals are commonly used in agricultural and automotive applications.
- Easy to install
- Cost-effective
- Reliable contamination exclusion
- If not in stock alternatives can be produced by SKF SEAL JET systems
SKU: 1907550
Great service and product!
Doing boat repairs is trying at best when you are on the hard. While the clock tics by , the dollars add up. Being able to find, order and receive part in a timely fashoin is a tall order and MRO Supply was able to meet all of our needs! Great job MRO! We'll be back!
Read moreSKU: 300488
Works good great delivery time
The seals works as they should. Delivery time was good
Read moreSKU: 1898441
Mro supply - seals
I use a lot of the SKF6119 seals for chainsaw repairs and MRO always has the best prices and fast shipping.
Read more
| Brand | Cooper Wiring |
| Model | GFI23A1NN |
| Brand | Cutting Tool Technologies |
| Model | SPEH-2522P C2 |
| Brand | Cooper Wiring |
| Model | AH4100R12W |
| Brand | E-T-A |
| Model | ESS30-S003-DC24V-1A |
| Brand | AttaBox |
| Model | AH664CLID |
| Brand | Thomson Linear |
| Model | QS 5/8 L PD 30 |
| Brand | System Plast |
| Model | VG-SSFS-10 |
SKU: 1907550
Great service and product!
Doing boat repairs is trying at best when you are on the hard. While the clock tics by , the dollars add up. Being able to find, order and receive part in a timely fashoin is a tall order and MRO Supply was able to meet all of our needs! Great job MRO! We'll be back!
Read moreSKU: 300488
Works good great delivery time
The seals works as they should. Delivery time was good
Read moreSKU: 1898441
Mro supply - seals
I use a lot of the SKF6119 seals for chainsaw repairs and MRO always has the best prices and fast shipping.
Read moreDisclaimer: The return policy information shown below is merely an excerpt from SKF's General Conditions of Sale.
RETURN OF GOODS FOR CREDIT
Goods will not be accepted for return without prior written approval from SKF. The return freight must be prepaid by the Buyer. Unless return of Goods is due to Supplier error, Goods returned will be subject to a credit service fee of $25.00 or 15% of the credit value, whichever is greater. An additional service fee may apply is further inspection is required at the discretion of SKF