We never sell your data to third parties
SKF / CR Seals 400400 VR1 V-Ring axial face seal for rotating shafts. Provides reliable sealing against contaminants and lubricant leakage in electric motors, gearboxes, and pumps. Flexible elastomer lip mounts directly on the shaft, accommodating axial and radial misalignment. Operating temperature range varies by material. Cost-effective shaft sealing solution.
MODEL 400400
Contact supplier for technical support on: 267-436-6000
$4.30 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 3 days
Returnable:No
Design
VR1
Max shaft diameter
43.0 mm, 1.693 in
Min shaft diameter
38.0 mm, 1.496 in
Seal width
9.0 mm, 0.354 in
Sealing lip material
Nitrile rubber (NBR)
Shaft diameter, maximum
43.0 mm, 1.693 in
Shaft diameter, minimum
38.0 mm, 1.496 in
V-ring seal, VR1 design, North American standard, interchangeable with VA design
V-ring seals (V-rings) are all-rubber, axial shaft seals. They offer an easy-to-install solution for rotating shaft applications, including use as a secondary seal in highly contaminated environments. The VR1 design includes a standard cross section with a straight back side face. Being the most common type of V-rings, VR1 seals are typically used to protect bearing arrangements in gearboxes, electric motors and drives.
- Easy to install
- Cost-effective
- Reliable contamination exclusion
- If not in stock alternatives can be produced by SKF SEAL JET systems
SKU: 1898441
Mro supply - seals
I use a lot of the SKF6119 seals for chainsaw repairs and MRO always has the best prices and fast shipping.
Read moreSKU: 301341
Great first impression
The site was easy to navigate. I placed the order and I was kept up to date with it’s processing and shipping progress. I would definitely use them again
Read moreSKU: 1898441
Mro supply - seals
I use a lot of the SKF6119 seals for chainsaw repairs and MRO always has the best prices and fast shipping.
Read moreSKU: 301341
Great first impression
The site was easy to navigate. I placed the order and I was kept up to date with it’s processing and shipping progress. I would definitely use them again
Read moreDisclaimer: The return policy information shown below is merely an excerpt from SKF's General Conditions of Sale.
RETURN OF GOODS FOR CREDIT
Goods will not be accepted for return without prior written approval from SKF. The return freight must be prepaid by the Buyer. Unless return of Goods is due to Supplier error, Goods returned will be subject to a credit service fee of $25.00 or 15% of the credit value, whichever is greater. An additional service fee may apply is further inspection is required at the discretion of SKF