We never sell your data to third parties
SKF / CR Seals (formerly CR Seals) 594186 is a single lip radial shaft oil seal with a nitrile (NBR) sealing lip and stainless steel spring. Designed for large diameter applications, this seal provides reliable lubricant retention and contaminant exclusion in electric motors, gearboxes, pumps, and industrial rotating equipment. Operating temperature range: -40°F to 250°F.
MODEL 594186
Contact supplier for technical support on: 267-436-6000
$265.12 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 3 days
Returnable:No
Auxiliary lip
No
Design
HDS1
Housing bore diameter
273.05 mm, 10.75 in
Maximum operating temperature
100.0 °C, 212.0 °F
Maximum operating temperature (°F)
100.0 °C, 212.0
Minimum operating temperature
-35.0 °C, -31.0 °F
Minimum operating temperature (°F)
-35.0 °C, -31.0
Permissible circumferential speed
15.0 m/s
Rotational speed
1352.0 r/min
Seal width
31.75 mm, 1.25 in
Sealing lip material
Nitrile rubber (NBR)
Shaft diameter
211.96 mm, 8.345 in
Type of outside diameter
Metal-cased
Unit system
Inch
Radial shaft seal for heavy industrial applications, metal-cased
HDS1 seals are designed for open housings in heavy industrial applications. They are self-retaining seals with a metal case and a garter spring and perform exceptionally well in large-size machinery, customized or heavy-duty machinery, and industrial gearboxes. They are designed for industries such as metal, construction, wind energy, forestry, mining, and pulp and paper.
- Self-retaining in an open housing bore
- Robust design
- Excellent oil or grease retention
- Excellent shaft followability
- Customized dimensions
- No minimum order quantity
| Brand | Linn Gear |
| Model | 50FB16X1.437 |
| Brand | Thomson Linear |
| Model | PA11-18B65-12EBLSX |
Disclaimer: The return policy information shown below is merely an excerpt from SKF's General Conditions of Sale.
RETURN OF GOODS FOR CREDIT
Goods will not be accepted for return without prior written approval from SKF. The return freight must be prepaid by the Buyer. Unless return of Goods is due to Supplier error, Goods returned will be subject to a credit service fee of $25.00 or 15% of the credit value, whichever is greater. An additional service fee may apply is further inspection is required at the discretion of SKF