We never sell your data to third parties
SKF / CR Seals (formerly CR Seals) 1200239 is a large diameter radial shaft oil seal designed for demanding applications. It features a single lip design with a stainless steel garter spring for consistent radial sealing force. The XNBR (carboxylated nitrile) sealing lip provides enhanced abrasion resistance and durability. This seal includes lubrication lugs and spacer lugs for improved installation and performance. Operating temperature range: -40°F to 250°F.
MODEL 1200239
Contact supplier for technical support on: 267-436-6000
$308.10 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 3 days
Returnable:No
Auxiliary lip
No
Design
HDS2
Housing bore diameter
342.9 mm, 13.5 in
Maximum operating temperature
100.0 °C, 212.0 °F
Maximum operating temperature (°F)
100.0 °C, 212.0
Minimum operating temperature
-30.0 °C, -22.0 °F
Minimum operating temperature (°F)
-30.0 °C, -22.0
Permissible circumferential speed
15.0 m/s
Rotational speed
940.0 r/min
Seal width
15.875 mm, 0.625 in
Sealing lip material
Carboxylated nitrile rubber (XNBR)
Shaft diameter
304.8 mm, 12.0 in
Type of outside diameter
Metal-cased
Unit system
Inch
Radial shaft seal for heavy industrial applications, metal-cased
HDS2 seals are designed for open housings in heavy industrial applications. They are equipped with a metal case and a garter spring, and an SKF Springcover. This provides reliable spring retention in a blind seal installation. They are self-retaining seals and perform exceptionally well in large-size machinery, and customized or heavy-duty machinery. They are designed for industries such as metal, construction, wind energy, forestry, mining, and pulp and paper.
- Self-retaining in an open housing bore
- Robust design
- Designed for blind installation
- Excellent grease or oil retention
- Customized dimensions
- No minimum order quantity
| Brand | Champion |
| Model | XGO-B |
| Brand | Orbit Industries |
| Model | OP266-BK |
| Brand | Thomson Linear |
| Model | PPA36-18B65-04NLSX |
Disclaimer: The return policy information shown below is merely an excerpt from SKF's General Conditions of Sale.
RETURN OF GOODS FOR CREDIT
Goods will not be accepted for return without prior written approval from SKF. The return freight must be prepaid by the Buyer. Unless return of Goods is due to Supplier error, Goods returned will be subject to a credit service fee of $25.00 or 15% of the credit value, whichever is greater. An additional service fee may apply is further inspection is required at the discretion of SKF