We never sell your data to third parties
SKF / CR Seals 188X215X16 CRWH1 R CRWH1 Single Lip with Auxiliary Lip radial shaft oil seal for 188mm shaft diameter, 215mm housing bore, and 16mm seal width. The auxiliary dust exclusion lip provides enhanced protection against external contaminants. Features an NBR sealing lip with spring loading for reliable radial contact. Operating temperature: -40°F to 250°F (-40°C to 121°C). Used in motors, gearboxes, pumps, and industrial rotating equipment.
MODEL 188X215X16 CRWH1 R
Contact supplier for technical support on: 267-436-6000
$108.75 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 3 days
Returnable:No
Auxiliary lip
No
Design
CRWH1
Housing bore diameter
215.0 mm, 8.465 in
Maximum operating temperature
100.0 °C, 212.0 °F
Maximum operating temperature (°F)
100.0 °C, 212.0
Minimum operating temperature
-40.0 °C, -40.0 °F
Minimum operating temperature (°F)
-40.0 °C, -40.0
Permissible circumferential speed
12.0 m/s
Rotational speed
1200.0 r/min
Seal width
16.0 mm, 0.63 in
Sealing lip material
Nitrile rubber (NBR)
Shaft diameter
188.0 mm, 7.402 in
Type of outside diameter
Metal-cased with sealant coating on the outside diameter
Unit system
Metric
Radial shaft seal with double metal case, SKF Wave lip, for oil or grease
Radial shaft seals are used between rotating and stationary machine components, or between components in relative motion. CRWH1 seals are designed with a double metal case, an SKF WAVE lip made of elastomer with a higher pumping rate to reduce heat generation, and a garter spring to optimize sealing against the shaft. Most of the seals feature the SKF Bore Tite coating on the outside diameter that helps fill small imperfections in the housing bore.
- For oil or grease
- With garter spring
- WAVE lip creates higher pumping rate
- WAVE lip has less friction between shaft and lip
- WAVE lip has a lower temperature at the contact point
SKU: 1898386
Small diameter seals
I use a lot of small diameter inch dimension seals for the repair of older chainsaws. MRO is a great resource for many seals with very competitive prices and free shipping for larger orders. I will continue to use MRO whenever I can.
Read more
| Brand | WEG |
| Model | 10018ET3H405T-W22 |
| Brand | SIEGMA |
| Model | 6IK120RGU-S3FT/6GU36KB |
| Brand | NTN Bearing |
| Model | SC515DS |
| Brand | GMN Bearings USA |
| Model | M 65 x 85 x 10 |
| Brand | Allen Bradley |
| Model | 1336F-BX040-AA-EN-HAS1-L5 |
| Brand | NK North America Inc. |
| Model | K2120.25114A3X40 |
| Brand | Toshiba |
| Model | 0104SDSR42A-P |
SKU: 1898386
Small diameter seals
I use a lot of small diameter inch dimension seals for the repair of older chainsaws. MRO is a great resource for many seals with very competitive prices and free shipping for larger orders. I will continue to use MRO whenever I can.
Read moreDisclaimer: The return policy information shown below is merely an excerpt from SKF's General Conditions of Sale.
RETURN OF GOODS FOR CREDIT
Goods will not be accepted for return without prior written approval from SKF. The return freight must be prepaid by the Buyer. Unless return of Goods is due to Supplier error, Goods returned will be subject to a credit service fee of $25.00 or 15% of the credit value, whichever is greater. An additional service fee may apply is further inspection is required at the discretion of SKF