We never sell your data to third parties
SKF / CR Seals 240X270X16 HDS2 V HDS2 Heavy Duty Double Lip radial shaft oil seal for 240mm shaft diameter, 270mm housing bore, and 16mm seal width. Constructed with a NBR sealing lip and spring-loaded garter spring for consistent radial sealing force. Operating temperature range: -40°F to 250°F (-40°C to 121°C). Suitable for use in electric motors, gearboxes, pumps, and other rotating equipment.
MODEL 240X270X16 HDS2 V
Contact supplier for technical support on: 267-436-6000
$508.84 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 3 days
Returnable:No
Bore diameter
270 mm
Design
HDS2
Lip Material
R
Nominal Seal Width (b)
16 mm
Pressure Differential [MPa]
0.1
Shaft diameter
240 mm
Specifications
| Principal dimensions | Design | Lip material | Pressure differential [MPa / psi] | Designation | US stock number | Notes | ||
|---|---|---|---|---|---|---|---|---|
| Shaft | Bore | Nominal seal width | ||||||
| d1 | b | |||||||
| mm | - | - | - | - | - | |||
| 240 | 270 | 16 | HDS2 | R | 0,1 | 240X270X16 HDS2 R | 594397 | With 6 fixed lugs, 3,2 mm long |
SKU: 300488
Works good great delivery time
The seals works as they should. Delivery time was good
Read moreSKU: 1898386
Small diameter seals
I use a lot of small diameter inch dimension seals for the repair of older chainsaws. MRO is a great resource for many seals with very competitive prices and free shipping for larger orders. I will continue to use MRO whenever I can.
Read more
SKU: 300488
Works good great delivery time
The seals works as they should. Delivery time was good
Read moreSKU: 1898386
Small diameter seals
I use a lot of small diameter inch dimension seals for the repair of older chainsaws. MRO is a great resource for many seals with very competitive prices and free shipping for larger orders. I will continue to use MRO whenever I can.
Read moreDisclaimer: The return policy information shown below is merely an excerpt from SKF's General Conditions of Sale.
RETURN OF GOODS FOR CREDIT
Goods will not be accepted for return without prior written approval from SKF. The return freight must be prepaid by the Buyer. Unless return of Goods is due to Supplier error, Goods returned will be subject to a credit service fee of $25.00 or 15% of the credit value, whichever is greater. An additional service fee may apply is further inspection is required at the discretion of SKF