We never sell your data to third parties
Image for Illustration purposes only. Actual product may vary
$41.94 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable: See conditions
Auxiliary lip
Yes
Design
CRWA1
Housing bore diameter
76.2 mm, 3.0 in
Maximum operating temperature
200.0 °C, 392.0 °F
Maximum operating temperature (°F)
200.0 °C, 392.0
Minimum operating temperature
-40.0 °C, -40.0 °F
Minimum operating temperature (°F)
-40.0 °C, -40.0
Permissible circumferential speed
25.72 m/s
Rotational speed
9360.0 r/min
Seal width
9.53 mm, 0.375 in
Sealing lip material
Fluoro rubber (FKM)
Shaft diameter
52.4 mm, 2.063 in
Type of outside diameter
Metal-cased with sealant coating on the outside diameter
Unit system
Inch
Radial shaft seal with metal case, SKF Wave lip and auxiliary, contacting lip, for oil or grease
Radial shaft seals are used between rotating and stationary machine components, or between components in relative motion. CRWA1 seals are designed with a metal case, an SKF WAVE lip made of elastomer with higher pumping rate to reduce heat generation, a garter spring to optimize sealing against the shaft, and a dust lip to improve contamination exclusion. Most of the seals feature the SKF Bore Tite coating on the outside diameter that helps fill small imperfections in the housing bore.
- For oil or grease
- With garter spring
- WAVE lip creates higher pumping rate
- WAVE lip has less friction between shaft and lip
- WAVE lip has a lower temperature at the contact point
SKU: 300488
Works good great delivery time
The seals works as they should. Delivery time was good
Read moreSKU: 1907550
Great service and product!
Doing boat repairs is trying at best when you are on the hard. While the clock tics by , the dollars add up. Being able to find, order and receive part in a timely fashoin is a tall order and MRO Supply was able to meet all of our needs! Great job MRO! We'll be back!
Read moreSKU: 1898441
Mro supply - seals
I use a lot of the SKF6119 seals for chainsaw repairs and MRO always has the best prices and fast shipping.
Read more
| Brand | SKF Seals |
| Model | 79620 |
| Brand | Chicago-Latrobe |
| Model | 43717 |
SKU: 300488
Works good great delivery time
The seals works as they should. Delivery time was good
Read moreSKU: 1907550
Great service and product!
Doing boat repairs is trying at best when you are on the hard. While the clock tics by , the dollars add up. Being able to find, order and receive part in a timely fashoin is a tall order and MRO Supply was able to meet all of our needs! Great job MRO! We'll be back!
Read moreSKU: 1898441
Mro supply - seals
I use a lot of the SKF6119 seals for chainsaw repairs and MRO always has the best prices and fast shipping.
Read moreDisclaimer: The return policy information shown below is merely an excerpt from SKF's General Conditions of Sale.
RETURN OF GOODS FOR CREDIT
Goods will not be accepted for return without prior written approval from SKF. The return freight must be prepaid by the Buyer. Unless return of Goods is due to Supplier error, Goods returned will be subject to a credit service fee of $25.00 or 15% of the credit value, whichever is greater. An additional service fee may apply is further inspection is required at the discretion of SKF