We never sell your data to third parties
Image for Illustration purposes only. Actual product may vary
SKF / CR Seals (formerly CR Seals) 135X170X12 HMSA10 RG is a HMSA10 Single Lip with Auxiliary Lip radial shaft oil seal for 135mm shaft diameter, 170mm housing bore, and 12mm seal width. The auxiliary dust exclusion lip provides enhanced protection against external contaminants. Constructed with an NBR sealing lip and spring-loaded garter spring for consistent radial sealing force. Operating temperature range: -40°F to 250°F (-40°C to 121°C).
MODEL 135X170X12 HMSA10 RG
Contact supplier for technical support on: 267-436-6000
$47.49 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable: See conditions
Auxiliary lip
Yes
Design
HMSA10
Housing bore diameter
170.0 mm, 6.693 in
Maximum operating temperature
100.0 °C, 212.0 °F
Maximum operating temperature (°F)
100.0 °C, 212.0
Minimum operating temperature
-40.0 °C, -40.0 °F
Minimum operating temperature (°F)
-40.0 °C, -40.0
Permissible circumferential speed
11.86 m/s
Rotational speed
1680.0 r/min
Seal width
12.0 mm, 0.472 in
Sealing lip material
Nitrile rubber (NBR)
Shaft diameter
135.0 mm, 5.315 in
Type of outside diameter
Rubber metal reinforced
Unit system
Metric
Radial shaft seal with rubber outside diameter and single sealing lip, for oil or grease
Radial shaft seals are used between rotating and stationary machine components, or between components in relative motion. HMSA10 seals are designed with a rubber outside diameter. They have a conventional sealing lip made of elastomer. A garter spring in the seal and a non-contacting auxiliary lip optimize the sealing against the shaft also in polluted environment.
- High pumping rate
- Higher contamination exclusion with dust lip
- With garter spring
- Accommodate misalignment
SKU: 1907550
Great service and product!
Doing boat repairs is trying at best when you are on the hard. While the clock tics by , the dollars add up. Being able to find, order and receive part in a timely fashoin is a tall order and MRO Supply was able to meet all of our needs! Great job MRO! We'll be back!
Read moreSKU: 301341
Great first impression
The site was easy to navigate. I placed the order and I was kept up to date with it’s processing and shipping progress. I would definitely use them again
Read more
| Brand | Koyo Bearing |
| Model | C-437-Q |
| Brand | WorldWide Electric |
| Model | HdRF262-60/1-L-56C |
| Brand | Electra/Grove Gear |
| Model | GR8130064.00 |
| Brand | Electra/Grove Gear |
| Model | GR8130038.00 |
| Brand | Bunting Bearings |
| Model | EP242828 |
SKU: 1907550
Great service and product!
Doing boat repairs is trying at best when you are on the hard. While the clock tics by , the dollars add up. Being able to find, order and receive part in a timely fashoin is a tall order and MRO Supply was able to meet all of our needs! Great job MRO! We'll be back!
Read moreSKU: 301341
Great first impression
The site was easy to navigate. I placed the order and I was kept up to date with it’s processing and shipping progress. I would definitely use them again
Read moreDisclaimer: The return policy information shown below is merely an excerpt from SKF's General Conditions of Sale.
RETURN OF GOODS FOR CREDIT
Goods will not be accepted for return without prior written approval from SKF. The return freight must be prepaid by the Buyer. Unless return of Goods is due to Supplier error, Goods returned will be subject to a credit service fee of $25.00 or 15% of the credit value, whichever is greater. An additional service fee may apply is further inspection is required at the discretion of SKF