We never sell your data to third parties
SKF / CR Seals (formerly CR Seals) 20X47X7 HMS5 V is a HMS5 Single Lip radial shaft oil seal for 20mm shaft diameter, 47mm housing bore, and 7mm seal width. Features a NBR sealing lip with spring loading for reliable radial contact. Operating temperature: -40°F to 250°F (-40°C to 121°C). Used in motors, gearboxes, pumps, and industrial rotating equipment. Prevents lubricant leakage and contaminant ingress.
MODEL 20X47X7 HMS5 V
Contact supplier for technical support on: 267-436-6000
$28.41 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable: See conditions
Auxiliary lip
No
Design
HMS5
Housing bore diameter
47.0 mm, 1.85 in
Maximum operating temperature
200.0 °C, 392.0 °F
Maximum operating temperature (°F)
200.0 °C, 392.0
Minimum operating temperature
-20.0 °C, -4.0 °F
Minimum operating temperature (°F)
-20.0 °C, -4.0
Permissible circumferential speed
14.9 m/s
Rotational speed
14220.0 r/min
Seal width
7.0 mm, 0.276 in
Sealing lip material
Fluoro rubber (FKM)
Shaft diameter
20.0 mm, 0.787 in
Type of outside diameter
Rubber metal reinforced
Unit system
Metric
Radial shaft seal with rubber outside diameter and single sealing lip, for oil or grease
Radial shaft seals are used between rotating and stationary machine components, or between components in relative motion. HMS5 seals are designed with a rubber outside diameter. They have a conventional sealing lip made of elastomer with a garter spring to maintain the right radial load.
- High pumping rate
- With garter spring
- Accommodate misalignment
| Brand | McGill Bearing |
| Model | GR 16 RSS/MI 13 |
| Brand | Bestorq |
| Model | 120XL037 |
| Brand | Allen Bradley |
| Model | 20AD8P0C3AYYNNNN |
Disclaimer: The return policy information shown below is merely an excerpt from SKF's General Conditions of Sale.
RETURN OF GOODS FOR CREDIT
Goods will not be accepted for return without prior written approval from SKF. The return freight must be prepaid by the Buyer. Unless return of Goods is due to Supplier error, Goods returned will be subject to a credit service fee of $25.00 or 15% of the credit value, whichever is greater. An additional service fee may apply is further inspection is required at the discretion of SKF