We never sell your data to third parties
SKFSEAL 25X35X7 HMSA10 V SMALL BORE SEALS
MODEL 25X35X7 HMSA10 V
Contact supplier for technical support on: 267-436-6000
$17.54 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 1 day
Returnable: See conditions
#2575746
Brand
SKF Seals
Model
18X40X7 HMS5 V
#2382246
Brand
System Plast
Model
VG-200-225-12-B
#2382613
Brand
System Plast
Model
VG-018M-02
#2382701
Brand
System Plast
Model
VG-212-8-516
Auxiliary lip
Yes
Design
HMSA10
Housing bore diameter
35.0 mm, 1.378 in
Maximum operating temperature
200.0 °C, 392.0 °F
Maximum operating temperature (°F)
200.0 °C, 392.0
Minimum operating temperature
-20.0 °C, -4.0 °F
Minimum operating temperature (°F)
-20.0 °C, -4.0
Permissible circumferential speed
17.4 m/s
Rotational speed
13320.0 r/min
Seal width
7.0 mm, 0.276 in
Sealing lip material
Fluoro rubber (FKM)
Shaft diameter
25.0 mm, 0.984 in
Type of outside diameter
Rubber metal reinforced
Unit system
Metric
Radial shaft seal with rubber outside diameter and single sealing lip, for oil or grease
Radial shaft seals are used between rotating and stationary machine components, or between components in relative motion. HMSA10 seals are designed with a rubber outside diameter. They have a conventional sealing lip made of elastomer. A garter spring in the seal and a non-contacting auxiliary lip optimize the sealing against the shaft also in polluted environment.
- High pumping rate
- Higher contamination exclusion with dust lip
- With garter spring
- Accommodate misalignment
Works good great delivery time
Verified · SKU 300488The seals works as they should. Delivery time was good Read more
Small diameter seals
Verified · SKU 1898386I use a lot of small diameter inch dimension seals for the repair of older chainsaws. MRO is a great resource for many seals with very competitive prices and free shipping for larger orders. I will continue to use MRO whenever I can. Read more
6119 seals
Verified · SKU 1898441Fast shipping Read more
Mro supply - seals
Verified · SKU 1898441I use a lot of the SKF6119 seals for chainsaw repairs and MRO always has the best prices and fast shipping. Read more
Disclaimer: The return policy information shown below is merely an excerpt from SKF's General Conditions of Sale.
RETURN OF GOODS FOR CREDIT
Goods will not be accepted for return without prior written approval from SKF. The return freight must be prepaid by the Buyer. Unless return of Goods is due to Supplier error, Goods returned will be subject to a credit service fee of $25.00 or 15% of the credit value, whichever is greater. An additional service fee may apply is further inspection is required at the discretion of SKF