We never sell your data to third parties
SKF / CR Seals 6247 small bore radial shaft oil seal for light-duty sealing applications. Features a nitrile rubber (NBR) sealing lip with spring-loaded garter spring for consistent radial force. Operating temperature range: -40°F to 250°F. Suitable for electric motors, gearboxes, pumps, and rotating equipment to prevent lubricant leakage and exclude contaminants.
MODEL 6247
Contact supplier for technical support on: 267-436-6000
$9.19 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Typically Ships in: 3 days
Returnable:No
#270739
Brand
NTN Bearing
Model
SC0228LLU
#305858
Brand
SKF Seals
Model
12530
#312000
Brand
SKF Seals
Model
19970
#734651
Brand
SKF Seals
Model
32X45X7 HMS5 RG
Auxiliary lip
Yes
Design
CRWA1
Housing bore diameter
30.0 mm, 1.181 in
Maximum operating temperature
100.0 °C, 212.0 °F
Maximum operating temperature (°F)
100.0 °C, 212.0
Minimum operating temperature
-40.0 °C, -40.0 °F
Minimum operating temperature (°F)
-40.0 °C, -40.0
Permissible circumferential speed
3.19 m/s
Rotational speed
3840.0 r/min
Seal width
6.35 mm, 0.25 in
Sealing lip material
Nitrile rubber (NBR)
Shaft diameter
15.88 mm, 0.625 in
Type of outside diameter
Metal-cased with sealant coating on the outside diameter
Unit system
Inch
Radial shaft seal with metal case, SKF Wave lip and auxiliary, contacting lip, for oil or grease
Radial shaft seals are used between rotating and stationary machine components, or between components in relative motion. CRWA1 seals are designed with a metal case, an SKF WAVE lip made of elastomer with higher pumping rate to reduce heat generation, a garter spring to optimize sealing against the shaft, and a dust lip to improve contamination exclusion. Most of the seals feature the SKF Bore Tite coating on the outside diameter that helps fill small imperfections in the housing bore.
- For oil or grease
- With garter spring
- WAVE lip creates higher pumping rate
- WAVE lip has less friction between shaft and lip
- WAVE lip has a lower temperature at the contact point
#96919278
Brand
BLACKSTAR
Model
BLS AK46H STL
#96710594
Brand
MRO Supply
Model
38CF-1-.33-18A
#95775493
Brand
Bestorq
Model
16/BK142
#5052156
Brand
Teco-Westinghouse
Model
CDP4504RZ
#95775695
Brand
Bestorq
Model
8/A124
#5925223
Brand
Bando
Model
100-DS3M-303
#96736647
Brand
INA Bearing
Model
LR207-2RSR
Disclaimer: The return policy information shown below is merely an excerpt from SKF's General Conditions of Sale.
RETURN OF GOODS FOR CREDIT
Goods will not be accepted for return without prior written approval from SKF. The return freight must be prepaid by the Buyer. Unless return of Goods is due to Supplier error, Goods returned will be subject to a credit service fee of $25.00 or 15% of the credit value, whichever is greater. An additional service fee may apply is further inspection is required at the discretion of SKF