We never sell your data to third parties
$11.07 Each
Prices are subject to change
FREE SHIPPING ON ORDERS OVER $100
Select Quantity
Returnable:No
Auxiliary lip
Yes
Design
CRWA1
Housing bore diameter
35.712 mm, 1.406 in
Maximum operating temperature
150.0 °C, 302.0 °F
Maximum operating temperature (°F)
150.0 °C, 302.0
Minimum operating temperature
-40.0 °C, -40.0 °F
Minimum operating temperature (°F)
-40.0 °C, -40.0
Permissible circumferential speed
9.14 m/s
Rotational speed
7080.0 r/min
Seal width
6.35 mm, 0.25 in
Sealing lip material
Polyacrylate elastomer (ACM)
Shaft diameter
24.61 mm, 0.969 in
Type of outside diameter
Metal-cased with sealant coating on the outside diameter
Unit system
Inch
Radial shaft seal with metal case, SKF Wave lip and auxiliary, contacting lip, for oil or grease
Radial shaft seals are used between rotating and stationary machine components, or between components in relative motion. CRWA1 seals are designed with a metal case, an SKF WAVE lip made of elastomer with higher pumping rate to reduce heat generation, a garter spring to optimize sealing against the shaft, and a dust lip to improve contamination exclusion. Most of the seals feature the SKF Bore Tite coating on the outside diameter that helps fill small imperfections in the housing bore.
- For oil or grease
- With garter spring
- WAVE lip creates higher pumping rate
- WAVE lip has less friction between shaft and lip
- WAVE lip has a lower temperature at the contact point
Seals
Verified · SKU 734684Fast delivery, very good price Read more
Did 4913
Verified · SKU 1898386Good product, fast delivery Read more
6119 seals
Verified · SKU 1898441Fast shipping Read more
Small diameter seals
Verified · SKU 1898386I use a lot of small diameter inch dimension seals for the repair of older chainsaws. MRO is a great resource for many seals with very competitive prices and free shipping for larger orders. I will continue to use MRO whenever I can. Read more
#1415116
Brand
Orbit Industries
Model
QR100-WH
#2839329
Brand
Hammond Power Solutions
Model
SH3U0112PB3S
#2234606
Brand
Gates Rubber
Model
TP1800-8MGT-50
Disclaimer: The return policy information shown below is merely an excerpt from SKF's General Conditions of Sale.
RETURN OF GOODS FOR CREDIT
Goods will not be accepted for return without prior written approval from SKF. The return freight must be prepaid by the Buyer. Unless return of Goods is due to Supplier error, Goods returned will be subject to a credit service fee of $25.00 or 15% of the credit value, whichever is greater. An additional service fee may apply is further inspection is required at the discretion of SKF